10.1inch Capacitive Touch LCD (F)

10.1inch Capacitive Touch LCD (F) 1024x600

{{{name2}}}

{{{name3}}}

{{{name4}}}

{{{name5}}}

Primary Attribute Category: {{{userDefinedInfo}}}: {{{userdefinedvalue}}} Brand: Waveshare

Website International: Website Chinese: 官网

Onboard Interfaces

Related Products

User Guide

• Pay attention to the position of the resistor shown in the picture. If it is connected incorrectly, it may cause the screen to not respond to touch, and even burn the motherboard and the screen in severe cases.
• 10.1inch Capacitive Touch LCD (F) Resistor as shown:

• 10.1inch HDMI LCD (F) Resistor as shown:

Hardware Connection

• Compatible STM32 development boards: support OpenH743I-C and Open746I-C (other types of development boards need to be modified by reference).

The hardware connection diagram is as follows:

• By default, the same-direction FFC cable is used. The RGB interface of the screen driver board is in contact with the gold finger down, and the RGB interface of the STM32 is in contact with the gold finger up and cannot be reversed.
• If the opposite-direction FFC cable is used, the RGB interface of the STM32 is connected downward.

Resource

Related Driver Source Code

10.1inch_Capacitive_Touch_LCD_(F).7z

Document

10.1inch_Capacitive_Touch_LCD_(F).pdf

FAQ

Question:What is the data format of the LCD LVDS interface?

 Answer:

RGB888

{{{5}}}

Question:Supported STM32 development board models?

 Answer:

At present, our company's development board only supports OpenH743I-C and Open746I-C development boards.

{{{5}}}