10.1HP-CAPQLED

From Waveshare Wiki
Revision as of 11:36, 17 June 2021 by Waveshare-eng11 (talk | contribs) (Created page with " {{Infobox item|colorscheme=green |name= 10HP-CAPQLED |img=300px|link=https://www.waveshare.com/10.1hp-capqled.htm|10HP-CAPQLED |platform=Support...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
10HP-CAPQLED
10HP-CAPQLED
{{{name2}}}

{{{name3}}}

{{{name4}}}

{{{name5}}}

Introduction

10.1inch QLED Quantum Dot Display, Capacitive Touch, 1280×720, G+G Toughened Glass Panel, Various Devices & Systems Support

More

Features

  • 10.1inch QLED quantum dot display, wider color gamut, more pure chroma, and longer lifetime.
  • 1280x720 hardware resolution, support software resolution (up to 1920x1080)
  • Toughened glass capacitive touch panel, 6H hardness. (case version only)
  • Support Jetson Nano Developer Kit, driver free
  • Used with Raspberry Pi, supports Raspbian, Ubuntu, WIN 10 IoT, driver free.
  • Support popular Game Consoles like Xbox360, PS4, and SWITCH.
  • Multi-languages OSD menu, for power management, brightness/contrast adjustment, etc.
  • It has a 3.5mm audio jack and supports HDMI audio output

What's ON Board

Exterior-Size.jpg

Working with PC

This product supports Windows 10/8.1/8/7 OS.:
1. Connect the TOUCH interface of LCD to the USB interface of PC. Wait for a while, the windows will automatically recognize the touch function.
2. Connect the HDMI interface of LCD to the HDMI port of PC. About 5s later, you can see the LCD display properly. If you need the audio, you can insert a 3.5mm earphones to HP ports.
Note:
1) When the computer is connected to several different displays at the same time, only this LCD can be used to control the cursor on the main display, so we recommended to set this LCD as the main display.
2) Some of PC cannot support HDMI screen Hot Plug. In this case, restart the PC can solve.
3) Sometimes LCD will flicker because of undersupplying from USB cable of PC. You need to connect an external power supply (5V/2A) to DC port.
4) HP audio output only works while using HDMI communication
5) Mini HDMI to VGA Cable is necessary and need to be purchased separately if you use VGA communication.

Calibration touch on Win 10 PC

Take the windows10 system as an example:

  • 1. Enter the Windows settings of the system, type in the search bar and click "Calibrate the screen for pen or touch input" (as shown in the picture below).

Win10 touch011.png

Win10 touch02.png
  • 2. Click "Setup" in the pop-up "Tablet PC Settings" interface:


  • 3. The following text prompt will appear on the screen. Please tap the touch screen with your finger, and the computer will recognize it as a touch screen.

【Note】If the touch screen is blank, press the "Enter" key, and the text prompt will switch to the touch screen. (The screen which displays the text prompt will be used as a touch screen!)

Win10 touch03.png

Working with Raspberry Pi

Supports Raspbian/Ubuntu mate/Windows 10 IoT Core

When working with Raspberry Pi, you should set the resolution of the LCD by yourself, otherwise, the LCD screen will not work. For more detailed information, please read the following section.

Please download the latest version of the image on the Raspberry Pi official website.

1) Download the compressed file to the PC, and unzip it to get the .img file.

2) Connect the TF card to the PC, use SDFormatter.exe software to format the TF card.

3) Open the Win32DiskImager.exe software, select the system image downloaded in step 1, and click‘Write’ to write the system image.

4) After the image has finished writing, open the config.txt file in the root directory of the TF card, and comment out dtoverlay=vc4-fkms-V3D.

5) Add the following code at the end of config.txt, then save and quit the TF card safely.

max_usb_current=1
hdmi_group=2 
hdmi_mode=87 
hdmi_timings=1280 0 160 32 48 720 0 10 10 12 0 0 0 60 0 77000000 3

You must make sure that there are no spaces on either side of the equal sign.

6) Save and connect the TF card to your Pi then power up.

7) Connect the Touch interface of LCD to the USB port of Raspberry Pi.

8) Connect the HDMI interface of LCD to the HDMI port of Raspberry Pi.


Note:

  • Resolution of Ubuntu Mate OS or Windows 10 IoT Core OS can also be set properly by editing config.txt.
  • For Pi Zero / Zero W: if you've used an SD card on a Pi 3 and then attached the card to the Pi Zero, the touch screen often doesn't work. In such cases, you have to write a fresh system image to the SD card. The first boot up must be done on the Pi Zero but not Pi 3, due to initialization for a corresponding device.


Resources

Software

External guides

FAQ

 Answer:
  • Make sure that the HDMI interface of the PC can output normally.
  • The PC only connects to this LCD as a monitor without others.
  • You should connect the touch cable first and then the HDMI cable.
  • Some PC need to be restarted to make the 7inch HDMI LCD display normally.

Note: The PC must use a windows system.

{{{3}}}
{{{4}}}

{{{5}}}


Anti-Piracy

Since the first-generation Raspberry Pi released, Waveshare has been working on designing, developing, and producing various fantastic touch LCDs for the Pi. Unfortunately, there are quite a few pirated/knock-off products in the market. They're usually some poor copies of our early hardware revisions, and comes with none support service.

To avoid becoming a victim of pirated products, please pay attention to the following features when purchasing:

RPi-LCD-Anti-Piracy.jpg

(Click to enlarge)

Beware of knock-offs

Please note that we've found some poor copies of this item in the market. They are usually made of inferior materials and shipped without any testing.

You might be wondering if the one you're watching or you've purchased in other non-official stores is original, feel free to contact us.

Support