10.1HP-CAPQLED

From Waveshare Wiki
Revision as of 11:23, 12 May 2022 by Waveshare-admin (talk | contribs) (Text replacement - "default={{#urlget:amazon|default}}" to "default={{#ifeq: {{#urlget:amazon|0}}|{{#urlget:Amazon|0}}| default|}}")
Jump to: navigation, search
10HP-CAPQLED
10HP-CAPQLED
{{{name2}}}

{{{name3}}}

{{{name4}}}

{{{name5}}}

Introduction

10.1inch QLED Quantum Dot Display, Capacitive Touch, 1280×720, G+G Toughened Glass Panel, Various Devices & Systems Support

More

Features

  • 10.1inch QLED quantum dot display, wider color gamut, more pure chroma, and longer lifetime.
  • 1280x720 hardware resolution, support software resolution (up to 1920x1080)
  • 10-point capacitive touch control
  • Toughened glass capacitive touch panel, 6H hardness. (case version only)
  • When used with Raspberry Pi, supports Raspberry Pi OS / Ubuntu / Kali and Retropie
  • Ubuntu is supported when used with Jetson Nano
  • When used as a computer monitor, supports Windows 11/10/8.1/8/7
  • Support popular Game Consoles like Xbox360, PS4, and SWITCH.
  • Multi-languages OSD menu, for power management, brightness/contrast adjustment, etc.
  • It has a 3.5mm audio jack and supports HDMI audio output

What's ON Board

Exterior-Size.jpg

Working with PC

This product supports Windows 11/10/8.1/8/7 OS.:
1. Connect the TOUCH interface of LCD to the USB interface of PC. Wait for a while, the windows will automatically recognize the touch function.
2. Connect the HDMI interface of LCD to the HDMI port of the PC. About 5s later, you can see the LCD display properly. If you need the audio, you can insert 3.5mm earphones into HP ports.
Note:
1) When the computer is connected to several different displays at the same time, only this LCD can be used to control the cursor on the main display, so we recommended setting this LCD as the main display.
2) Some of PC cannot support HDMI screen Hot Plug. In this case, restart the PC can solve.
3) Sometimes LCD will flicker because of undersupplying from USB cable of PC. You need to connect an external power supply (5V/2A) to DC port.

Working with Raspberry Pi

Support Raspberry Pi OS / Ubuntu / Kali and Retropie systems for Raspberry Pi

When working with Raspberry Pi, you should set the resolution of the LCD by yourself, otherwise, the LCD screen will not work. For more detailed information, please read the following section.

Please download the latest version of the image on the Raspberry Pi official website.

1) Download the compressed file to the PC, and unzip it to get the .img file.

2) Connect the TF card to the PC, use File:Panasonic SDFormatter.zip software to format the TF card.

3) Open the File:Win32DiskImager.zip software, select the system image downloaded in step 1, and click‘Write’ to write the system image.

4) After the image has finished writing, open the config.txt file in the root directory of the TF card.

5) Add the following code at the end of config.txt, then save and quit the TF card safely.

hdmi_group=2 
hdmi_mode=87 
hdmi_timings=1280 0 160 32 48 720 0 10 10 12 0 0 0 60 0 77000000 3

You must make sure that there are no spaces on either side of the equal sign.

6) Save and connect the TF card to your Pi then power up.

7) Connect the Touch interface of LCD to the USB port of Raspberry Pi.

8) Connect the HDMI interface of LCD to the HDMI port of Raspberry Pi.

After about a few seconds, you can see the LCD display normally.

Working with Jetson Nano

To use with Jetson Nano, it doesn't require to configure.

1) Connect the TOUCH interface of the display to the USB port of Jetson Nano

2) Connect the HDMI interface of the display to the HDMI port of Jetson Nano.

3) Wait for seconds and the display will work normally. If you need to get the audio, you need to connect 3.5mm earphones to the HP port of the display.

Resources

Relevant information

Software

FAQ

 Answer:
Add the following command to /boot/config.txt
disable_splash=1


 Answer:

Replace the custom image with the image in this directory /usr/share/plymouth/themes/pix/splash.png


Anti-Piracy

Since the first-generation Raspberry Pi released, Waveshare has been working on designing, developing, and producing various fantastic touch LCDs for the Pi. Unfortunately, there are quite a few pirated/knock-off products in the market. They're usually some poor copies of our early hardware revisions, and comes with none support service.

To avoid becoming a victim of pirated products, please pay attention to the following features when purchasing:

RPi-LCD-Anti-Piracy.jpg

(Click to enlarge)

Beware of knock-offs

Please note that we've found some poor copies of this item in the market. They are usually made of inferior materials and shipped without any testing.

You might be wondering if the one you're watching or you've purchased in other non-official stores is original, feel free to contact us.

Support

Support

If you require technical support, please go to the Support page and open a ticket.