Difference between revisions of "1.54inch e-Paper Module (B)"

From Waveshare Wiki
Jump to: navigation, search
Line 239: Line 239:
 
=== Datasheets ===
 
=== Datasheets ===
 
* [[:File:1.54inch-e-paper-b-specification.pdf|Datasheets]]
 
* [[:File:1.54inch-e-paper-b-specification.pdf|Datasheets]]
 +
==+Software===
 +
*[[:File:Image2Lcd.7z|Image2Lcd.7x]]
 
===Related Resources===
 
===Related Resources===
 
This is a post in Arduino Form about our SPI e-Paper thanks to ZinggJM, maybe you want to refer to.
 
This is a post in Arduino Form about our SPI e-Paper thanks to ZinggJM, maybe you want to refer to.

Revision as of 10:14, 8 March 2019

1.54inch e-Paper (B)
1.54inch-e-Paper-B-1.jpg

200x200, 1.54inch E-Ink display raw panel without driver board.
1.54inch e-Paper Module (B)
1.54inch-e-paper-module-b-4.jpg

200x200, 1.54inch E-Ink display module, three-color, SPI interface
{{{name3}}}

{{{name4}}}

{{{name5}}}

Introduction

Note: As the raw panel requires a driver board, we recommend you to buy the HAT or buy a driver board for use, or you need to make the driver board by yourself. And this instruction is based on the version with PCB or driver board.

200x200, 1.54inch E-Ink display module, three-color, SPI interface

More

Display a Frame (DisplayFrame)

DisplayFrame is used to send a frame to module, and the screen will refresh and display it.

Process: Send command data start transmission 1 -> Send data of dark area -> Send command data start transmission 2 -> Send data of red area -> Refresh the screen. Note:

  • One frame consist of images of black area and red area, so we need to send two images for displaying one frame,
  • The image of black part: 2 bits = 1 pixel, doesn’t support Gray scale (Can only display black and white). 00b stand for black pixel, and 11b stand for white.

For example:

0xC3:4 pixels □■■□
0x00:4 pixels ■■■■
0xFF:4 pixels □□□□
0x66:The state of pixels is uncertain
  • The image of red area: 1 bit = 1 pixel, doesn’t support Gray scale (Can only display red and white). The pixel is white if Bit is set, and it is red on the contrary.

For example:

0xC3:8 pixels □□■■■■□□
0x00:8 pixels ■■■■■■■■
0xFF:8 pixels □□□□□□□□
0x66:8 pixels ■□□■■□□■
  • This module doesn’t support partial refresh.
  • The refresh rate of this module is slow, and it will flicker for several times during refreshing (about 8s). Please be patient.

Resources

Documentation

Demo code

Datasheets

+Software=

Related Resources

This is a post in Arduino Form about our SPI e-Paper thanks to ZinggJM, maybe you want to refer to.

FAQ

 Answer:
  • Two-color B/W e-paper
    • 【Working】Temperature: 0~50°C; Humidity: 35%~65%RH
    • 【Storage】Temperature: ≤30°C; Humidity: ≤55%RH; Max storage time: 6 months
    • 【Transport】Temperature: -25~70°C; Max transport time: 10 days
    • 【Unpack】Temperature: 20°C±5°C; Humidity: 50%RH±5%RH; Max storage time: Should be assembled in 72h
  • Three-Color e-Paper
    • 【Working】Temperature: 0~40°C; Humidity: 35%~65%RH
    • 【Storage】Temperature: ≤30°C; Humidity: ≤55%RH; Max storage time: 3 months
    • 【Transport】Temperature: -25~60°C; Max transport time: 10 days
    • 【Unpack】Temperature: 20°C±5°C; Humidity: 50%RH±5%RH; Max storage time: Should be assembled in 72h

When store three-color e-Paper, please refresh it to white, and keep the screen upward. Note that you need to update it at least every three months.


Support

Support

If you require technical support, please go to the Support page and open a ticket.