Difference between revisions of "1.3inch OLED (A)"
From Waveshare Wiki
(→Pin) |
|||
| Line 33: | Line 33: | ||
*Visible Angle: >160° | *Visible Angle: >160° | ||
== Pin == | == Pin == | ||
| − | {| | + | {|border=1; style="width:700px;text-align:center" align="center"; |
| − | + | |-style="background:#0000ff; color:white;" align="center" | |
| + | |PIN||Description | ||
|- | |- | ||
|VCC||3.3V/5V | |VCC||3.3V/5V | ||
Revision as of 09:32, 9 June 2022
| ||
Overview
Introduction
1.3inch OLED, SPI/I2C interfaces, curved/horizontal pinheader
| More |
Specification
- Operating Voltage: 3.3V/5V
- Communication Interface: 3-wire SPI, 4-wire SPI, I2C
- Screen Types: OLED
- Driver Chip: SH1106
- Resolution: 128*64(Pixel)
- Display Size: 14.7（H）x 29.42（V）(mm)
- Pixel Size: 0.21 x 0.21 (mm)
- Dimension: 40.5 x 37.5(mm)
- Display Color: Blue
- Operating TEMP. (℃): -30~70
- STORAGE TEMP. (℃): -30~80
- Visible Angle: >160°
Pin
| PIN | Description |
| VCC | 3.3V/5V |
| GND | Ground |
| VCC | 3.3V/5V |
| NC | NC |
| DIN | SPI Data Input |
| CLK | SPI Clock Input |
| CS | Chip selection, low active |
| RST | Reset |
Resources
FAQ
Answer:
The OLED module should work at a system with 3.3V operation voltage. However, it can work properly at a system with 5V operation voltage as well, the aging test (more than 24 hours) shows.
{{{5}}}
Support
If you require technical support, please go to the Support page and open a ticket.