0.95inch RGB OLED (A)
From Waveshare Wiki
Revision as of 09:50, 20 April 2015 by Wiki Editorial Team (talk | contribs) (Created page with " http://www.waveshare.net/wiki/0.95inch_RGB_OLED_(A) 中文 ==Resources== <div class="thumb tright"> <div class="thumbinner" st...")
[中文]
Resources
<htmltag tagname="a" href="http://www.waveshare.com/product/0.95inch-RGB-OLED-A.htm" target="_blank" title="Introduction"> <htmltag tagname="img" alt="0.95inch-RGB-OLED-A" src="http://www.waveshare.com/img/preview/0.95inch-RGB-OLED-A_L.jpg" width="300" height="225" class="thumbimage"> </htmltag>
FAQ
Answer:
The OLED module is used in a 3.3V system by default.
{{{5}}}
Answer:
Under normal working conditions, generally 50,000 hours.
{{{5}}}
Answer:
At the operating voltage of 3.3V:
Working current of 0.95inch RGB OLED: about 38mA for full white display, about 4mA for full black display.
The working current of 0.96inch OLED is about 25mA when fully on, and 1.5mA when fully off.
{{{5}}}
Answer:
OLED has no backlight, and the display is self-illuminating. Only connect VCC and GND, the OLED will not light up.
Program control is required to brighten the OLED.
Program control is required to brighten the OLED.
{{{5}}}
Answer:
1. Be careful not to connect the power supply in reverse.
2. The same picture cannot be displayed for a long time, otherwise it will produce afterimages and cause damage to the OLED.
2. The same picture cannot be displayed for a long time, otherwise it will produce afterimages and cause damage to the OLED.
{{{5}}}
Support
Support
If you require technical support, please go to the Support page and open a ticket.