RM500U-CN 5G HAT for Raspberry Pi, Quad Antennas LTE-A, Multi Band, 5G/4G/3G

SKU: 21705
Part Number: RM500U-CN 5G HAT
Brand: Waveshare

$189.99
$186.992+
$185.493+
$184.894+

Related Products:

Description

Details

RM500U-CN 5G HAT for Raspberry Pi, quad antennas LTE-A, multi band, 5G/4G/3G compatible
This product is suitable for China.
Feel free to contact us if you need to change to other module, refer to the table below and the supported bands according to your local service provider.
5G Sub-6 RM500U-CN RM500Q-CN RM500Q-GL
Region / Provider China China Global (except US)
RM500U-CN 5G HAT for Raspberry Pi

Comes with RM500U-CN, supports 5G/4G/3G, supports 5G NSA and SA

Features at a glance
  • Comes with RM500U-CN core module, supports 5G and LTE-A multi network types, supports 5G NSA and SA networking
  • Integrates extensive network protocols, with multi drivers and software support, compatible with different OS including Windows / Linux / Android
  • USB 3.1 port (USB 2.0 compatible) for connecting to PC, Raspberry Pi, or Jetson Nano host board to enable high speed 5G communication
  • Standard M.2 B KEY slot, compatible with different 5G modules: RM500U-CN / RM500Q-CN / RM500Q-GL series
  • Onboard UART, PWR, and RST control pin, built-in voltage level translator, enabled via DIP switch, for use with hosts like Raspberry Pi or Arduino
  • Onboard USB-C connector, enabled via switch, for connecting standalone power supply for the module, allows more loads, stable amd flexible power supply
  • Onboard power supply on/off switch, reset button and LED indicator, easy to turn on/off the module or monitor the operating status
  • 2x SIM card slot, dual card single standby, switchable via AT command
  • High efficiency power supply circuit, up to 3A output current
Module Specifications
Frequency band
5G 5G NR 3GPP Release 15 NSA/SA operation, Sub-6 GHz
5G NR NSA n41, n78, n79
5G NR SA n1, n28, n41, n77, n78, n79
Downlink 4 × 4 MIMO n1, n41, n77, n78, n79
LTE LTE Category downlink Cat 12, uplink Cat 13
LTE-FDD B1, B2, B3, B5, B7, B8, B20, B28
LTE-TDD B34, B38, B39, B40, B41
LAA -
Downlink 2 × 2 MIMO B1, B2, B3, B5, B7, B8, B20, B28, B34, B38, B39, B40, B41
UMTS WCDMA B1, B2, B5, B8
Data rate
5G SA Sub-6 downlink 2 Gbps; uplink 1 Gbps
5G NSA Sub-6 downlink 2.2 Gbps; uplink 575 Mbps
LTE downlink 600 Mbps; uplink 150 Mbps
UMTS downlink 42.2 Mbps; uplink 11 Mbps
Others
Operating temperature -30 °C ~ +75 °C
Extension temperature -40 °C ~ +85 °C
Module dimensions 30.0 × 52.0 × 2.3 (mm)
Module weight 8.9 (g)
Multi system support, easy to use

supports Windows / Linux / Android...

Just plug it into USB port, go through some simple configuration, the high speed 5G network connection will be ready to use

Connection examples

for Windows PC or Jetson Nano series, use a USB cable
for Raspberry Pi 4B/3B+, or CM4-IO-BASE-A/B, use the purpose-made USB adapter

connecting with Raspberry Pi 4B

connecting with Raspberry Pi 3B+

connecting with CM4 IO Base

Cloud Communication
Standard Raspberry Pi 40PIN GPIO header

compatible with Raspberry Pi series and Jetson Nano, stackable design for more HATs

* for reference only, please check the Package Content section for exact part list.
High speed cooling fan

better heat dissipation for both Raspberry Pi and the 5G module

Standard M.2 B KEY slot

Compatible with RM500U-CN, RM500Q-CN, RM500Q-GL series modules

5G Sub-6 RM500U-CN RM500Q-CN RM500Q-GL
Region / Provider China China Global (except US)
Operating temperature -30 °C ~ +75 °C
Extension temperature -40 °C ~ +85 °C
Dimensions 30.0 × 52.0 × 2.3 (mm)
Weight 8.9 (g) 8.7 (g)
Power supply 3.3~4.4 V, typical 3.7 V 3.135~4.4 V, typical 3.7 V
Power consumption 90 μA @ shutdown
3.7 mA @ hibernate
TBD @ USB 2.0, idle
TBD @ USB 3.0, idle
78 μA @ shutdown
4.1 mA @ hibernate
32 mA @ USB 2.0, idle
52 mA @ USB 3.0, idle
70 μA @ shutdown
4.0 mA @ hibernate
32 mA @ USB 2.0, idle
54 mA @ USB 3.0, idle
Frequency band
5G 5G NR NSA n41, n78, n79 n41, n77, n78, n79
5G NR SA n1, n28, n41, n77, n78, n79 n1, n28, n41, n78, n79 n1, n2, n3, n5, n7, n8, n12, n20, n25, n28, n38, n40, n41, n48*, n66, n71, n77, n78, n79
LTE LTE-FDD B1, B2, B3, B5, B7, B8, B20, B28 B1, B3, B5, B8 B1, B2, B3, B4, B5, B7, B8, B12, B13, B14, B17, B18, B19, B20, B25, B26, B28, B29, B30, B32, B66, B71
LTE-TDD B34, B38, B39, B40, B41 B34, B38, B39, B40, B41 B34, B38, B39, B40, B41, B42, B43, B48
LAA - B46
UMTS WCDMA B1, B2, B5, B8 B1, B8 B1, B2, B3, B4, B5, B6, B8, B19
GNSS - GPS / GLONASS / BeiDou (Compass) / Galileo
Data rate
5G SA Sub-6 downlink 2 Gbps;
uplink 1 Gbps
downlink 2.1 Gbps;
uplink 900 Mbps
5G NSA Sub-6 downlink 2.2 Gbps;
uplink 575 Mbps
downlink 2.5 Gbps;
uplink 525/550 Mbps
downlink 2.5 Gbps;
uplink 600/650 Mbps
LTE downlink 600 Mbps;
uplink 150 Mbps
downlink 1.0 Gbps;
uplink 200 Mbps
UMTS downlink 42.2 Mbps;
uplink 11 Mbps
downlink 42 Mbps;
uplink 5.76 Mbps
* means developing/planning/processing
Comes with RM500U-CN module by default, for other modules or hardware customization, feel free to contract us.
Application examples

5G Wireless Router
Combined with OpenWrt, turns the Raspberry Pi into a 5G wireless router, providing WiFi hotspot for smartphones to easily access the 5G Network.

5G Live Streaming
While mounting an additional camera, it is able to do live streaming on webpage or live platform through ffmpeg video stream.

More Possibilities
Outline Dimensions
Resources & Services

Weight: 0.295 kg

Quick Overview

  1. M.2 TO 4G/5G HAT x1
  2. RM500U-CN x1
  3. Antenna 4pcs x1
  4. IPEX adapter cable 4pcs x1
  5. 2*20PIN pin header x1
  6. 5V 3A Type-C power adapter x1
  7. Dual plug USB3.0 cable x1
  8. USB3.0 adapter x1
  9. USB2.0 adapter x1
  10. SMA protective cap 4pcs x1
  11. Screws pack x1