Raspberry Pi Zero Package E, with 2.13inch e-Paper HAT

SKU: 13657
Part Number: Raspberry Pi Zero Package E

$49.99
$49.392+
$49.093+
$48.994+
Description

Details

Raspberry Pi Zero V1.3 Development Kit Type E, Micro SD Card, Power Adapter, 2.13inch e-Paper HAT, and Basic Components

Overview

This development kit includes: the Raspberry Pi Zero V1.3, 16GB Micro SD Card, 5V 2.5A Power Adapter, 2.13inch e-Paper HAT (B) which is a three-color e-ink display.

The kit also comes with some most basic components you may need to get going with your Pi Zero: Mini HDMI to HDMI Adapter, Micro USB OTG Cable, and 2×20-pin 2.54 male/female pinheader strips.

Raspberry Pi Zero Features

  • Broadcom BCM2835
    • 1GHz ARM11 single-core processor
  • 512MB RAM
  • Micro SD card slot
  • Mini-HDMI port (1080p60 video output)
  • Micro-USB power
  • Micro-USB OTG port
  • 40PIN unpopulated GPIO header (compatible with A+/B+/2B/3B)
  • CSI camera connector
  • Composite video header
  • Composite reset header
  • Dimension: 65mm x 30mm x 5mm

2.13inch e-Paper HAT (B) Features

  • No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, basically power is only required for refreshing
  • Compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+
  • Preserved solder pads for SPI interface, for connecting with other controller boards like Arduino/Nucleo, etc.
  • Onboard voltage translator, compatible with 3.3V/5V MCUs
  • Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)

2.13inch e-Paper HAT (B) Specifications

  • Operating voltage: 3.3V/5V
  • Interface: 3-wire SPI, 4-wire SPI
  • Outline dimension: 65mm × 30.2mm
  • Display size: 23.71mm × 48.55mm
  • Dot pitch: 0.229 × 0.228
  • Resolution: 212 × 104
  • Display color: red, black, white
  • Grey level: 2
  • Full refresh time: 15s
  • Refresh power: 26.4mW(typ.)
  • Standby power: <0.017mW
  • Viewing angle: >170°

Selection Guide

Package ContentsProducts
ItemDescriptionStandardPackage APackage BPackage DPackage E
Raspberry Pi Zero Raspberry Pi Zero original V1.3
Mini HDMI to HDMI Adapter Mini HDMI male to standard HDMI female  
Micro USB OTG Cable Micro USB to USB  
2x20-pin 2.54 male pinheader strip Can be soldered in the Zero  
2x20-pin 2.54 female pinheader strip Can be soldered in the Zero  
Micro SD Card 16GB Class 10 16GB Micro SD Card    
5V 2.5A Power Adapter 5V 2.5A output    
Raspberry Pi Zero Case Official Case for the Zero        
USB HUB HAT USB HUB, USB to UART        
2.13inch e-Paper HAT (B) 2.13inch e-ink display, three-color: red, black, and white        
Package Content

Weight: 0.144 kg

Quick Overview

  1. Raspberry Pi Zero x1
  2. Mini HDMI to HDMI Adapter x1
  3. Micro USB OTG Cable x1
  4. 2x20-pin 2.54 male pinheader strip x1
  5. 2x20-pin 2.54 female pinheader strip x1
  6. Micro SD Card 16GB x1
  7. Power adapter US standard 5V/3A micro x1
  8. 2.13inch e-Paper HAT (B) x1
  9. RPi screws pack (2pcs) x1
  10. PH2.0 20cm 8Pin x1
1
2
3
4
5
6
7
8
9
10