Details
Equipped with a high-performance SIM7600G-H-M.2 4G global module
Supports 4G / 3G / 2G communication and GNSS positioning, global band support
- Supports dial-up, phone call, SMS, TCP, UDP, MQTT, HTTP(S), FTP(S), and so on
- GNSS positioning: GPS, Beidou, Glonass, Galileo, QZSS, LBS base station
- USB 3.1 port (USB 2.0 compatible) for connecting to Jetson Orin, PC, or Raspberry Pi to enable high speed 4G network
- Onboard standard M.2 B KEY slot and module selection switches, compatible with SIM8260X-M2 / SIM8262X-M2 / RM5XX / SIM7600 modules
- 4 x SMA antenna connectors, easy to install the antennas
- Reserved UART solder pads for convenient data transmission and other functions with certain modules
- Onboard audio interface and audio decoding chip, enabling voice operations such as making calls on SIMXXX series modules
- Onboard power switch, reset button, and LED indicator for convenient power control and status monitoring
- Onboard high-efficiency power supply circuit, up to 3A output current
| 5G / 4G module | SIM8260G-M2 | SIM8262E-M2 | RM520N-GL | SIM7600G-H-M.2 |
|---|---|---|---|---|
| Images | ![]() |
![]() |
![]() |
![]() |
| 5G standard | 3GPP R16 | - | ||
| Chip Solution | Qualcomm Snapdragon X62 | Qualcomm MDM9607 | ||
| Applicable regions | Global | Except Americas | Global | |
| Dimensions (mm) | 30.0 × 52.0 × 2.3 | 30.0 × 42.0 × 2.3 | 30.0 × 52.0 × 2.3 | 42.0 × 31.4 × 3.8 |
| Frequency band | ||||
| 5G SA | n1, n2, n3, n5, n7, n8, n12, n13, n14, n18, n20, n25, n26, n28, n29, n30, n38, n40, n41, n48, n66, n71, n75, n76, n77, n78, n79 | n1, n3, n5, n7, n8, n18, n20, n26, n28, n38, n40, n41, n48, n66, n77, n78, n79 | n1, n2, n3, n5, n7, n8, n12, n13, n14, n18, n20, n25, n26, n28, n29, n30, n38, n40, n41, n48, n66, n70, n71, n75, n76, n77, n78, n79 | - |
| 5G NSA | n1, n2, n3, n5, n7, n8, n12, n14, n20, n25, n28, n30, n38, n40, n41, n48, n66, n71, n75, n77, n78, n79 | n1, n3, n5, n7, n8, n20, n28, n38, n40, n41, n48, n66, n77, n78, n79 | n1, n2, n3, n5, n7, n8, n12, n13, n14, n18, n20, n25, n26, n28, n29, n30, n38, n40, n41, n48, n66, n70, n71, n75, n76, n77, n78, n79 | - |
| LTE-FDD | B1, B2, B3, B4, B5, B7, B8, B12, B13, B14, B17, B18, B19, B20, B25, B26, B28, B29, B30, B32, B66, B71 | B1, B3, B5, B7, B8, B18, B19, B20, B26, B28, B32 | B1, B2, B3, B4, B5, B7, B8, B12, B13, B14, B17, B18, B19, B20, B25, B26, B28, B29, B30, B32, B66, B71 | B1, B2, B3, B4, B5, B7, B8, B12, B13, B18, B19, B20, B25, B26, B28, B66 |
| LTE-TDD | B34, B38, B39, B40, B41, B42, B43, B46, B48 | B38, B39, B40, B41, B42, B43 | B34, B38, B39, B40, B41, B42, B43, B48 | B34, B38, B39, B40, B41 |
| WCDMA | B1, B2, B4, B5, B8, B19 | B1, B5, B8 | B1, B2, B4, B5, B8, B19 | B1, B2, B4, B5, B6, B8, B19 |
| GNSS | GPS, GLONASS, Beidou, Galileo, and QZSS | |||
| Data rate | ||||
| Sub-6G SA | 2.5Gbps (DL) / 0.9Gbps (UL) | 2.4Gbps (DL) / 1Gbps (UL) | 2.4Gbps (DL) / 900Mbps (UL) | - |
| Sub-6G NSA | 3.47Gbps (DL) / 460Mbps (UL) | 3.4Gbps (DL) / 600Mbps (UL) | 3.4Gbps (DL) / 550Mbps (UL) | - |
| LTE | 1.6Gbps (DL) / 200Mbps (UL) | 150Mbps (DL) / 50Mbps (UL) | ||
| HSPA+ | 42Mbps (DL) / 5.76 Mbps (UL) | |||
Note: The above are the supported modules after testing; If you need to use with other 5G modules, please confirm with the module manufacturer for interface and mode compatibility. |
||||
LTE Cat-4: up to 150Mbps (downlink) / 50Mbps (uplink)
3G (HSPA+): up to 42Mbps (downlink) / 5.76Mbps (uplink)
2G (GPRS/EDGE): up to 236.8Kbps (downlink) / 236.8Kbps (uplink)
Supports Windows 7 / 8 / 10 / 11, Ubuntu, Raspberry Pi OS, and OpenWRT systems. Just plug it into USB port and simple configuration, the high speed 4G network connection would be ready to use
for Jetson Orin Nano and Jetson Orin NX, use the purpose-made USB adapter;
for Windows PC, Jetson Nano series, Raspberry Pi 5 / 4B / 3B+, and CM5 / CM4 series, use the USB dual-plug cable
Connecting with Jetson Nano
Connecting with Raspberry Pi 5
Connecting with CM5
* stands for idealized data rate, the actual data rate depends on factors like network coverage, traffic congestion, host performance, base station condition, etc.
for reference only, the Raspberry Pi 5, CM5 Module, CM5, Jetson Nano Kit, and Jetson Orin Kit are not included, please refer to the package content for detailed part list.
Supports GPS, GLONASS, BeiDou, Galileo, QZSS, and LBS base station positioning
allows using AT commands to make phone call via Audio jack or send SMS
- USB3.1 port
USB 2.0 compatible, for connecting with different hosts - M.2 slot
compatible with most SIMCom and QUECTEL 4G / 5G modules in M.2 form factor - USB Type-C port
5V 3A power input, stable and flexible power supply - Reset button
- Module fixing holes
supports 3042 / 3052 package modules - Antenna connectors
Supports quad antennas - Module settings switch
Switch A to ON for SIM7600X / A7906X / SIM7906X / SIM7912X series 4G M.2 modules;
Switch B to ON for SIM8202X / SIM8200EA / SIM8262X / SIM8260X series 5G M.2 modules;
Switch C to ON for RM520N-GL / RM530X / EM06X series 5G / LTE-A M.2 modules
- Power supply switch
Switch the power supply mode:
When set to USB, the module is powered via the "1. USB3.1 port"
When set to EXT PWR, the module is powered by the external power supply via the "3. USB Type-C port" - Indicator
Easy to monitor the operating status of module - Audio jack
SIM82XX / SIM7600X series supports audio function, but RM5XX series temporarily does not support this function - eSIM card slot
configured via AT commands, suitable for SIM8XXX / RM5XX / EM06XX series modules, SIM7600X series modules are not supported - Nano SIM card slot
please turn off the power before installing or removing the SIM card. - Level conversion circuit
- Reserved UART and audio interface pads
- Mounting holes
for installing this module onto the Jetson Orin board via screws - Audio drive circuit
- Power supply circuit
- Fan header
for 5V cooling fan
* for reference only, please refer to the package content for detailed part list
Weight: 0.242 kg
Quick Overview
- Jetson Orin M.2 4G / 5G expansion board x1
- SIM7600G-H-M.2 x1
- 4G antenna x2
- SMA protective cap (5PCS) x1
- IPEX1 to SMA adapter cable ~10cm x1
- IPEX1 to IPEX4 adapter cable ~5cm (2PCS) x1
- Screws pack x1
- GPS External Antenna (C) x1
- Dual plug USB3.0 Type-A cable x1
- Heatsink x1
- USB 3.0 Adapter (C) x1
- Screwdriver x1




