SIM7600CE-CNSE 4G HAT for Raspberry Pi, 4G / 3G / 2G, for China

SKU: 18800
Part Number: SIM7600CE-CNSE 4G HAT
Brand: Waveshare

$53.99 DISCONTINUED
$52.992+
$52.493+
$52.294+

Related Products:

Description

Details

* This product has been discontinued, it is recommended to purchase the alternative solution: SIM7600CE-JT1S 4G HAT with more network standards and frequency bands support.
Prohibited by the module manufacturer SIMCOM, we're not allowed to ship this product, or to provide any tech support, to the following countries/regions: Iran, North Korea, Cuba, Sudan, Syrian.
SIM7600CE-CNSE 4G HAT for Raspberry Pi, supports 4G / 3G / 2G communication, also LBS positioning

For different regions, we provide multiple LTE Cat-4/Cat-1 HATs to choose from:

SIM7600A-H 4G HAT LTE Cat-4 mainly applicable in North America (US, CA)
SIM7600E-H 4G HAT LTE Cat-4 mainly applicable in Europe, Southeast Asia, West Asia, Africa, China, South Korea
SIM7600E LTE Cat-1 HAT LTE Cat-1
A7670E Cat-1 HAT
A7600E Cat-1/GSM/GPRS HAT
SIM7600SA-H 4G HAT LTE Cat-4 mainly applicable in Australia, New Zealand, Taiwan (China), Latin America
SIM7600CE 4G HAT LTE Cat-4 mainly applicable in China, and some Southeast Asia countries
SIM7600CE-CNSE 4G HAT
SIM7600CE-JT1S 4G HAT
A7600C1 Cat-1/GSM/GPRS HAT LTE Cat-1
SIM7600G-H 4G HAT LTE Cat-4 the global version

Please check the supported bands according to your local service provider, select the proper one when placing order.

4G HAT for Raspberry Pi

enabling 4G / 3G / 2G communication & LBS positioning

Based on SIM7600CE-CNSE

Features at a glance
  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
  • Supports dial-up, telephone call, SMS, TCP, UDP, DTMF, HTTP, FTP, etc.
  • Supports LBS base station positioning
  • Onboard USB interface, for testing AT Commands, establishing network connection, and so on
  • Onboard CP2102 USB to UART converter, for serial debugging
  • Breakout UART control pins, to connect with host boards like Arduino/STM32
  • SIM card slot, supports 1.8V/3V SIM card
  • TF card slot for storing data like files, messages, etc.
  • Onboard audio jack and audio decoder for making telephone call
  • 2x LED indicators, easy to monitor the working status
  • Onboard voltage translator, operating voltage can be configured to 3.3V or 5V via jumper
  • Baudrate: 300bps ~ 4Mbps (default: 115200bps)
  • Autobauding baudrate: 9600bps ~ 115200bps
  • Control via AT commands (3GPP TS 27.007, 27.005, and V.25TER command set)
  • Supports SIM application toolkit: SAT Class 3, GSM 11.14 Release 99, USAT
  • Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
Specifications
Frequency band
LTE Cat-4 LTE-FDD: B1/B3/B5/B8
LTE-TDD: B38/B39/B40/B41
3G UMTS/HSDPA/HSPA+: B1/B8
2G GSM/GPRS/EDGE: 900/1800 MHz
SMS and Audio
SMS Supported types: MT, MO, CB, Text, PDU
Storage: USIM card and ME (default)
Audio feature Supports echo cancellation
Supports noise reduction
Others
Power supply 5V
Operating voltage 5V / 3.3V (configured via jumper)
Operating temperature -30°C ~ 80°C
Storage temperature -45°C ~ 90°C
Dimensions 56.01mm × 65.00mm
Standard Raspberry Pi 40PIN GPIO

Compatible with Raspberry Pi series boards, Jetson Nano

Dial-up on Windows/Linux

LTE Cat-4: up to 50Mbps (uplink) / up to 150Mbps (downlink) *
3G (HSPA+): up to 5.76Mbps (uplink) / up to 42Mbps (downlink) *

* stands for idealized data rate, the actual data rate depends on factors like network coverage, traffic congestion, base station condition, etc.

Cloud Communication

Supports communication protocols including TCP/UDP/FTP/FTPS/HTTP/HTTPS

telephone call & SMS Support

Making telephone call or sending SMS by AT commands, with onboard audio jack

What's on board
  1. SIM7600CE-CNSE
  2. CP2102 USB to UART converter
  3. NAU8810 audio decoder
  4. TXS0108EPWR voltage translator
    • translates 3.3V/5V into 1.8V
  5. MP2128DT power chip
  6. SPX29302 power chip
  7. Raspberry Pi GPIO header
    • for connecting with Raspberry Pi
  8. SIM7600 control interface
    • for connecting with host boards like Arduino/STM32
  9. SIM card slot
    • supports 1.8V/3V SIM card
  10. TF card slot
    • for storing data like files, messages, etc.
  11. 3.5mm earphone/mic jack
    • for audio actions like making telephone call
  12. USB interface
    • for testing AT Commands, and so on
  13. USB TO UART interface
    • for serial debugging, or login to Raspberry Pi
  1. MAIN antenna connector
  2. Module power switch
  3. Network status indicator
  4. Power indicator
  5. UART selection jumper
    • A: access Raspberry Pi via USB to UART
    • B: control the SIM7600 by Raspberry Pi
    • C: control the SIM7600 via USB to UART
  6. PWR selection jumper
    • PWR - 3V3: auto startup on power-up
    • PWR - D6: startup/shutdown by the Raspberry Pi D6 pin
  7. Flight mode selection jumper
    • NC by default, no flight mode control pin
    • Flight - D4: flight mode is controlled by the Raspberry Pi D4 pin
  8. Operating voltage selection jumper
    • VCCIO - 3.3V: set operating voltage as 3.3V
    • VCCIO - 5V: set operating voltage as 5V
  9. USB connector solder pads
  10. BOOT forced programming solder pads
Pinout definition
Outline Dimensions
Resources & Services

* Resources for different product may vary, please check the wiki page to confirm the actually provided resources.

Selection Guide
 SIM7600CE-JT1SSIM7600CE-TSIM7600ESIM7600E-HSIM7600A-HSIM7600G-H
Applicable regions China Europe/Southeast Asia/West Asia/Africa/China/South Korea North America Global
Band
LTE Cat-4 LTE-FDD
B1/B3/B5/B8
LTE-TDD
B38/B39/B40/B41
LTE-FDD
B1/B3/B5/B7/B8/B20
LTE-TDD
B38/B40/B41
LTE-FDD
B2/B4/B12
LTE-FDD
B1/B2/B3/B4/B5/B7
/B8/B12/B13/B18/B19
/B20/B25/B26/B28/B66
LTE-TDD
B34/B38 /B39/B40/B41
3G UMTS/HSDPA/HSPA+
B1/B8
TD-SCDMA
B34/B39
CDMA
1X/EVDO BC0
UMTS/HSPA+
B1/B5/B8
UMTS/HSPA+
B2/B5
UMTS/HSDPA/HSPA+
B1/B2/B4/B5/B6/B8/B19
2G GSM/GPRS/EDGE
900/1800 MHz
N/A GSM/GPRS/EDGE
850/900/1800/1900MHz
GNSS N/A GPS/Beidou/GLONASS/GALILEO/QZSS
Data Rate
LTE Cat-4 150Mbps(DL)/50Mbps(UL) N/A 150Mbps(DL)/50Mbps(UL)
LTE Cat-1 N/A 10Mbps(DL)
/5Mbps(UL)
N/A
3G (HSPA+) 42Mbps(DL)/5.76Mbps(UL)
2G (EDGE) 236.8Kbps(DL/UL) N/A 236.8Kbps(DL/UL)
2G (GPRS) 85.6Kbps(DL/UL) N/A 85.6Kbps(DL/UL)
Software Features
Network protocol TCP/IP/IPV4/IPV6/Multi-PDP/FTP/FTPS/HTTP/HTTPS/DNS
Dial-up protocol PPP/NDIS/RNDIS
USB driver Windows XP/7/8/10, Linux (driver free for Raspbian)
Hardware Interfaces
SIM card slot Compatible with 1.8V and 3V SIM card
UART Supports AT commands through UART, compatible with 3.3V/5V operating voltage
USB port Supports AT commands testing, network communication, firmware upgrading, etc.
USB to UART Supports serial debugging, or login to Raspberry Pi
Audio jack Supports audio actions like making telephoto call
TF card slot Yes, for storing data like files, messages, etc. N/A Yes
Antenna connector LTE main antenna LTE main antenna + LTE diversity antenna + GNSS antenna
Applications
Examples Healthcare, smart payment, Internet talk, environmental monitoring, energy monitoring, fleet management, smart industry, intelligent agriculture, etc.

Weight: 0.187 kg

Quick Overview

  1. SIM7600CE-CNSE 4G HAT x1
  2. LTE Antenna x1
  3. USB-A to Micro-B cable x2
  4. RPi screws pack (2pcs) x1
1
2
3
4