- Description
Details
Raspberry Pi Zero WH (built-in WiFi, pre-soldered headers) Development Kit Type E, Micro SD Card, Power Adapter, 2.13inch e-Paper HAT, and Basic Components
Overview
This development kit includes: the Raspberry Pi Zero WH (built-in WiFi, pre-soldered headers), 16GB Micro SD Card, 5V 2.5A Power Adapter, 2.13inch e-Paper HAT (B) which is a three-color e-ink display.
The kit also comes with some most basic components you may need to get going with your Pi Zero: Mini HDMI to HDMI Adapter, Micro USB OTG Cable.
Raspberry Pi Zero WH Features
- Broadcom BCM2835
- 1GHz ARM11 single-core processor
- 512MB RAM
- Added wireless connectivity
- 802.11 b/g/n wireless LAN
- Bluetooth 4.1
- Bluetooth Low Energy (BLE)
- 40PIN pre-soldered GPIO headers
- Micro SD card slot
- Mini-HDMI port (1080p60 video output)
- Micro-USB power
- Micro-USB OTG port
- CSI camera connector
- Composite video header
- Composite reset header
- Dimension: 65mm x 30mm x 11.6mm
2.13inch e-Paper HAT (B) Features
- No backlight, keeps displaying last content for a long time even when power down
- Ultra low power consumption, basically power is only required for refreshing
- Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
- SPI interface, for connecting with other controller boards like Arduino/Nucleo, etc.
- Onboard voltage translator, compatible with 3.3V/5V MCUs
- Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
2.13inch e-Paper HAT (B) Specifications
- Operating voltage: 3.3V/5V
- Interface: 3-wire SPI, 4-wire SPI
- Outline dimension: 65mm × 30.2mm
- Display size: 23.71mm × 48.55mm
- Dot pitch: 0.229 × 0.228
- Resolution: 250 × 122
- Display color: red, black, white
- Grey level: 2
- Full refresh time: 15s
- Refresh power: 26.4mW(typ.)
- Standby power: <0.017mW
- Viewing angle: >170°
Selection Guide
| Package Contents | Products | ||||||
|---|---|---|---|---|---|---|---|
| Item | Standard | Package A | Package B | Package D | Package E | Package F | AlphaBot2 |
| Raspberry Pi Zero WH, with WiFi, Bluetooth, GPIO header | √ | √ | √ | √ | √ | √ | √ |
| Mini HDMI to HDMI Adapter | √ | √ | √ | √ | |||
| Micro USB OTG Cable | √ | √ | √ | √ | |||
| Micro SD Card 16GB, Class 10 | √ | √ | √ | √ | |||
| 5V/3A Power Adapter, Micro USB output | √ | √ | √ | √ | |||
| Raspberry Pi Zero Official Case | √ | ||||||
| USB HUB HAT, USB to UART | √ | ||||||
| 2.13inch e-Paper HAT (B), three-color | √ | ||||||
| 1.3inch IPS LCD display | √ | ||||||
| UPS Uninterruptible Power Supply | √ | ||||||
| Black acrylic protection panels | √ | ||||||
| AlphaBot2-PiZero adapter board for Zero | √ | ||||||
| AlphaBot2-Base robot base board, motor driver & sensors | √ | ||||||
| Ultrasonic sensor, obstacle avoidance, ranging | √ | ||||||
| IR remote controller | √ | ||||||
| RPi Camera (B), adjustable focus distance | √ | ||||||
| SG90 servo and pan head, for camera rotation | √ | ||||||
Weight: 0.151 kg
Quick Overview
- Raspberry Pi Zero WH x1
- Mini HDMI to HDMI Adapter x1
- Micro USB OTG Cable x1
- Micro SD Card 16GB x1
- Power adapter US standard 5V/3A micro x1
- 2.13inch e-Paper HAT (B) x1
- RPi screws pack (2pcs) x1
- PH2.0 20cm 8Pin x1
1
2
3
4
5
6
7
8
