-
Human Micro-Motion Detection mmWave Sensor, 24GHz mmWave Radar, Based On S3KM1110, Adopts FMCW Technology
$2.82 - $2.99Part No.:HMMD-mmWave-Sensor
SKU:26536
-
Serial Bus Servo DC Buck Adapter, Mini Module, Design for Serial Bus Servos, Easy to Use, 7.2V Buck Regulator
$3.15 - $3.49Part No.:DC BUCK Adapter (7.2V)
SKU:27380
-
Raspberry Pi 400 GPIO Header Adapter, Header Expansion
$3.48 - $3.99Part No.:PI400-GPIO-ADAPTER-A
SKU:18994
-
Serial Bus Servo Driver Board, Integrates Servo Power Supply And Control Circuit, Applicable for ST/SC Series Serial Bus Servos
$4.99Part No.:Bus Servo Adapter (A)
SKU:25514
-
Raspberry Pi 400 GPIO Header Adapter, Header Expansion, 2x 40PIN Header
$4.39 - $4.99Part No.:PI400-GPIO-ADAPTER-B
SKU:18995
-
-
Micro HDMI to HDMI Multifunctional Adapter, Compatible with Raspberry Pi 5 / 4B, Two Power Supply Methods, Supports Dual 4K Outputs
$5.65 - $5.99Part No.:Pi5 Connector Adapter
SKU:27009
-
PCIe To M.2 Mini Adapter for Raspberry Pi 5, Supports NVMe Protocol M.2 Solid State Drive, High-speed Reading/Writing, Raspberry Pi 5 NVMe HAT
$5.31 - $5.99Part No.:PCIe TO M.2 MINI
SKU:27580
-
BMM150 3-axis Magnetometer Sensor, Digital Compass Sensor, Magnetic Field Measurement
$6.31 - $6.99Part No.:BMM150 3-Axis Magnetometer Sensor
SKU:24657
-
PCIe TO Gigabit ETH Board (C) For Raspberry Pi 5, Supports Raspberry Pi OS, Driver-Free, Plug And Play, Raspberry Pi 5 PCIe Adapter
$6.65 - $6.99Part No.:PCIe TO Gigabit ETH Board (C)
SKU:26848
-
USB Sound Card, Driver-Free, for Raspberry Pi / Jetson Nano
$7.31 - $7.99Part No.:USB TO AUDIO
SKU:18833
-
USB HUB HAT (B) for Raspberry Pi Series, 4x USB 2.0 Ports
$7.31 - $7.99Part No.:USB HUB HAT (B)
SKU:20317
-
Industrial USB TO TTL (D) Serial Cable, Original FT232RNL Chip, Multi Protection Circuits, Multi Systems Support, Suitable For Raspberry Pi 5 Serial Port Debugging
$6.97 - $7.99Part No.:USB TO TTL (D)
SKU:26738
-
Ctrl C/V Shortcut Keyboard For Programmers, 3-Key Development Board, Adopts RP2040 Microcontroller Chip
$7.99 - $12.99Part No.:rp2040_keyboard_3
-
Industrial USB TO RS485 Bidirectional Converter, Onboard original CH343G, Multi-Protection Circuits
$7.31 - $7.99Part No.:USB TO RS485 (B)
SKU:22456
-
Industrial USB TO TTL (C) 6pin Serial Cable, Original FT232RNL Chip, Multi Protection Circuits, Multi Systems Support, With Hardware Flow Control
$6.97 - $7.99Part No.:USB TO TTL (C)
SKU:26739
-
PCIe To M.2 Adapter Board (C) for Raspberry Pi 5, Supports NVMe Protocol M.2 Solid State Drive, High-speed Reading/Writing
$7.81 - $8.49Part No.:PCIe TO M.2 Board (C)
SKU:26785
-
PCIe To M.2 E KEY HAT for Raspberry Pi 5, Compatible With NGFF (M.2 E Key) Wireless NIC, Supports USB Bluetooth Connection, HAT+ Standard, Raspberry Pi 5 PCIe HAT
$8.49 - $24.49Part No.:PCIE TO M.2 E KEY HAT+
-
PCIe To M.2 Adapter Board (D) for Raspberry Pi 5, Compatible with 2280 / 2260 / 2242 / 2230 size NVMe Protocol M.2 SSD, Raspberry Pi 5 NVMe
$7.81 - $8.49Part No.:PCIe TO M.2 Board (D)
SKU:27709
-
-
PCIe To M.2 Adapter for Raspberry Pi 5, Supports NVMe Protocol M.2 Solid State Drive, High-speed Reading/Writing, HAT + Standard
$8.99 - $39.99Part No.:pcie_to_m.2_hat_plus
-
BMP390 High Precision Barometric Pressure Sensor, Barometric Pressure / Altitude / Temperature Measuring
$8.97 - $9.99Part No.:BMP390 Barometric Pressure Sensor
SKU:24658
-
True color RGB LED HAT for Raspberry Pi, colorful display
$9.99 - $10.99Part No.:RGB LED HAT
SKU:12725
-
BME68X Environmental Sensor, Supports Temperature / Humidity / Barometric Pressure / Gas Detection, optional AI function
$10.99 - $21.99Part No.:bme68x_sensor
-
Ethernet / USB HUB HAT for Raspberry Pi, 1x RJ45, 3x USB
$11.31 - $11.99Part No.:ETH/USB HUB HAT
SKU:16595
-
Ethernet / USB HUB HAT (B) for Raspberry Pi Series, 1x RJ45, 3x USB 2.0
$11.31 - $11.99Part No.:ETH/USB HUB HAT (B)
SKU:20416
-
RTC WatchDog HAT (B) For Raspberry Pi, Onboard DS3231SN High Precision RTC Chip
$11.31 - $11.99Part No.:RTC Watchdog HAT (B)
SKU:25766
-
USB HUB BOX for Raspberry Pi Zero Series, 4x USB 2.0 Ports
$11.31 - $11.99Part No.:USB-HUB-BOX
SKU:20892
-
-
PCIe To M.2 Adapter Board (E) For Raspberry Pi 5, With Cooling Fan, Compatible With 2242 / 2230 Size NVMe Protocol M.2 SSD, High-speed Reading/Writing, Raspberry Pi 5 NVMe
$12.31 - $12.99Part No.:PCIe TO M.2 Board (E)
SKU:28013
-
Serial Expansion HAT for Raspberry Pi, I2C Interface, 2-ch UART, 8 GPIOs
$11.97 - $12.99Part No.:Serial Expansion HAT
SKU:15667
-
PWM Controlled Fan HAT for Raspberry Pi, I2C, Temperature Monitor
$11.63 - $12.99Part No.:Fan HAT
SKU:17951
-
RTC WatchDog HAT for Raspberry Pi, Auto Reset, High Precision RTC
$12.31 - $12.99Part No.:RTC WatchDog HAT
SKU:20374
-
USB to RS232/485 Serial Converter, Onboard Original FT232RNL Chip, Multiple devices applicable, Multi-OS compatible
$11.97 - $12.99Part No.:USB TO RS232/485
SKU:26630
-
PCIe FFC Connector To Standard PCIe x1 Slot Adapter Board (C) For Raspberry Pi 5, Compatible With PCIe x1, x4, x8, And x16 Interface Devices
$12.99Part No.:PCIe TO PCIe x1 Board (C)
-
USB To RS232/485 Serial Cable, Original FT232RNL Chip, Onboard Power And Signal Indicators, Multi-OS Compatible & Multi-device Applicable
$12.97 - $13.99Part No.:USB TO RS232/485 (C)
SKU:29573
-
-
Official Raspberry Pi PCIe To M.2 HAT, Designed for Raspberry Pi 5, HAT + Standard, Supports NVMe Protocol M.2 Solid State Drive, Raspberry Pi 5 HAT
$13.31 - $13.99Part No.:Raspberry Pi M.2 HAT+
SKU:27455
-
Motor Driver HAT for Raspberry Pi, I2C Interface
$12.97 - $13.99Part No.:Motor Driver HAT
SKU:15364
-
Servo Driver HAT (B) for Raspberry Pi, 16-Channel, 12-bit, I2C
$13.97 - $14.99Part No.:Servo Driver HAT (B)
SKU:17035
-
Nano Base Board (A) for Raspberry Pi Compute Module 5, Same Size As The CM5
$14.31 - $14.99Part No.:CM5-NANO-A
SKU:29307
-
HRB8825 Stepper Motor HAT For Raspberry Pi, Drives Two Stepper Motors, Up To 1/32 Microstepping
$13.63 - $14.99Part No.:Stepper Motor HAT (B)
SKU:22311
-
2-Ch PCIe FFC Adapter Board For Raspberry Pi 5, Expands 2-Ch PCIe FFC Connectors, Supports Stacking Multiple PCIe HATs, Raspberry Pi 5 PCIe HAT
$14.31 - $14.99Part No.:PCIe TO 2-CH PCIe HAT
SKU:30490
-
LC76G Multi-GNSS Module, Supports GPS, BDS, GLONASS, Galileo, QZSS
$13.63 - $14.99Part No.:LC76G GNSS Module
SKU:24370
-
Servo Driver HAT for Raspberry Pi, 16-Channel, 12-bit, I2C
$13.97 - $14.99Part No.:Servo Driver HAT
SKU:15275
-
PCIe To 4-Ch USB3.2 Gen1 Board (C) For Raspberry Pi 5, Up To 5Gbps Transmission Speed, Driver-Free, Plug And Play, Raspberry Pi 5 PCIe Adapter
$14.31 - $14.99Part No.:PCIe TO USB 3.2 Gen1 Board (C)
SKU:27834
-
Power over Ethernet HAT (E) for Raspberry Pi 3B+/4B, 802.3af-compliant
$13.63 - $14.99Part No.:PoE HAT (E)
SKU:23285
-
-
2-Channel Isolated RS232 Expansion HAT for Raspberry Pi
$14.63 - $15.99Part No.:2-CH RS232 HAT
SKU:17498
-
SIM7028 NB-IoT HAT for Raspberry Pi, Supports Global Band NB-IoT Communication, Small In Size And Low Power Consumption
$14.97 - $15.99Part No.:SIM7028 NB-IoT HAT (EN)
SKU:25349
-
Ethernet / USB HUB BOX for Raspberry Pi Zero Series, 1x RJ45, 3x USB 2.0
$15.31 - $15.99Part No.:ETH-USB-HUB-BOX
SKU:20894
-
Industrial USB TO 4Ch RS485 Converter, Multi Protection Circuits, Multi Systems Support, Aluminium Alloy Case
$15.31 - $15.99Part No.:USB TO 4CH RS485
SKU:25219
-
SX1262 LoRaWAN Node Module Expansion Board for Raspberry Pi, With Magnetic CB antenna, Options For Frequency Band And GNSS Function
$15.99 - $24.99Part No.:sx1262_lorawan_hat
-
Power Over Ethernet HAT (G) For Raspberry Pi 5 / CM 5, 5V 5A Output, Supports 802.3af/at Network Standard, Raspberry Pi 5 PoE HAT
$15.99 - $23.99Part No.:poe_hat_g
-
Raspberry Pi Original USB Debug Probe, Hardware debug kit designed for Pico, Based on RP2040 Microcontroller
$15.31 - $15.99Part No.:Raspberry Pi Debug Probe
SKU:24270
-
PCIe To 2-ch M.2 Adapter for Raspberry Pi 5, Compatible with 2230/2242 Size NVMe Solid State Drive, Raspberry Pi 5 M.2 HAT
$15.31 - $15.99Part No.:PCIe TO 2-CH M.2 HAT+
SKU:27480
-
Stack HAT for Raspberry Pi, stacks up to 5 HATs at once
$15.99 - $16.99Part No.:Stack HAT
SKU:15799
-
Power over Ethernet HAT (D) for Raspberry Pi 3B+/4B, 802.3af-compliant, Official case compatible
$15.63 - $16.99Part No.:PoE HAT (D)
SKU:19532
-
PCIe To 2-Ch M.2 Adapter Type B for Raspberry Pi 5, Compatible with 2280 / 2260 / 2242 / 2230 size NVMe Protocol M.2 SSD, Raspberry Pi 5 NVMe HAT
$17.31 - $17.99Part No.:PCIe TO 2-CH M.2 HAT+ (B)
SKU:27710
-
USB TO 2CH RS485 Industrial Grade Isolated Converter, USB To RS485 Adapter, Onboard Original FT2232HL Chip, Stable And Reliable Communication
$16.97 - $17.99Part No.:USB TO 2CH RS485
SKU:27646
-
-
Isolated RS485 RS232 Expansion HAT for Raspberry Pi, SPI Control
$16.63 - $17.99Part No.:RS485 RS232 HAT
SKU:21648
-
Nano Base Board (B) for Raspberry Pi Compute Module 5, Same Size As The CM5
$17.31 - $17.99Part No.:CM5-NANO-B
SKU:30581
-
Mini Uninterruptible Power Supply module, Supports charging And Power output at the same time, 5V 2.5A Output
$16.29 - $17.99Part No.:UPS Module Mini
SKU:24760
-
USB to RS485/422 Industrial Grade Isolated Converter, Onboard Original FT232RL and SP485EEN, Multiple Protection
$16.97 - $17.99Part No.:USB TO RS485/422
SKU:23949
-
USB to CAN Adapter Model A, STM32 Chip Solution, Multiple Working modes, Multi-system Compatible
$18.31 - $18.99Part No.:USB-CAN-A
SKU:23635
-
Stepper Motor HAT for Raspberry Pi, Drives Two Stepper Motors
$17.29 - $18.99Part No.:Stepper Motor HAT
SKU:15669
-
Li-ion Battery HAT for Raspberry Pi, 5V Output, Quick Charge
$17.99 - $18.99Part No.:Li-ion Battery HAT (EN)
SKU:15141
-
PCIe To USB 3.2 Gen1 HAT for Raspberry Pi 5, PCIe to USB HUB, 4x High Speed USB Ports, driver-free, plug and play, HAT + Standard
$18.31 - $18.99Part No.:PCIe TO USB 3.2 Gen1 HAT+
SKU:26847
-
Li-polymer Battery HAT, 5V Output, Quick Charge
$17.97 - $18.99Part No.:Li-polymer Battery HAT
SKU:17076
-
Serial Bus Servo Driver HAT, Integrates ESP32 and Servo Control Circuit, Suitable for ST / RSBL Series Serial Bus Servos
$17.97 - $18.99Part No.:Bus Servo Driver HAT (A)
SKU:27577
-
2-Channel Isolated RS485 Expansion HAT for Raspberry Pi
$17.63 - $18.99Part No.:2-CH RS485 HAT
SKU:17221
-
USB 3.2 Gen1 HUB HAT for Raspberry Pi, 4x USB 3.2 Gen1 Ports, Driver-Free
$17.97 - $18.99Part No.:USB 3.2 Gen1 HUB HAT
SKU:17584
-
2-CH Triac HAT for Raspberry Pi, Integrated MCU, UART / I2C
$17.63 - $18.99Part No.:2-CH TRIAC HAT
SKU:17852
-
WM8960 Hi-Fi Sound Card HAT for Raspberry Pi, Stereo CODEC, Play/Record
$17.29 - $18.99Part No.:WM8960 Audio HAT
SKU:15668
-
Raspberry Pi CM4 To 3B Adapter B version, Alternative Solution for Raspberry Pi 3 Model B/B+
$18.97 - $19.99Part No.:CM4-to-Pi3-Adapter-B
SKU:25871
-
Power over Ethernet HAT (B) for Raspberry Pi 3B+/4B and 802.3af PoE network
$18.63 - $19.99Part No.:PoE HAT (B)
SKU:18014
-
Power over Ethernet HAT (C) for Raspberry Pi 3B+/4B, 802.3af/at-compliant
$18.63 - $19.99Part No.:PoE HAT (C)
SKU:19445
-
Mini Base Board (A) designed for Raspberry Pi Compute Module 5
$19.31 - $19.99Part No.:CM5-IO-BASE-A
SKU:30489
-
4-ch Current/Voltage/Power Monitor HAT for Raspberry Pi, I2C/SMBus
$18.63 - $19.99Part No.:Current/Power Monitor HAT
SKU:17539
