CAN Bus Module for Raspberry Pi Pico, UART to CAN conversion

SKU: 20240
Part Number: Pico-CAN-A
Brand: Waveshare


Related Products:



CAN bus Module for Raspberry Pi Pico, enabling long range communication through UART
CAN bus Module for Pico

enabling reliable long range communication for Raspberry Pi Pico

Features at a glance
  • Standard Raspberry Pi Pico header, supports Raspberry Pi Pico series
  • Incorporates E810-TTL-CAN01 module, UART to CAN bus conversion
  • Three conversion methods: transparent conversion, transparent conversion with identification, and protocol mode conversion
  • Comes with development resources and manual (Raspberry Pi Pico C/C++ and MicroPython examples)
Operating voltage 3.3V CAN transceiver E810-TTL-CAN01
Communication bus UART Baudrate 300~921600bps
Raspberry Pi Pico header compatibility

onboard female pin header for direct attaching to Raspberry Pi Pico

Raspberry Pi Pico is NOT included.
What's On Board
  1. E810-TTL-CAN01 module
  2. Module operating indicator
  3. Module status indicator
    operating mode: blinking at 1Hz frequency
    command configuration mode: blinking at 5Hz frequency
  4. TX/RX indicators
  1. Resistor config
    ON: connected to 120R matching resistor
    OFF: disconnected from 120R matching resistor (default)
  2. CAN bus terminal
  3. Power supply selection
  4. UART selection
Pinout definition
Outline dimensions
Resources & Services


* Resources for different product may vary, please check the wiki page to confirm the actually provided resources.

Weight: 0.012 kg

Quick Overview

  1. Pico-CAN-A x1