Details
Designed For Raspberry Pi 5, Driver-free, Plug and Play
- Based on Raspberry Pi 40PIN GPIO header, compatible with Raspberry Pi series boards
- Adopts PCM5122 professional stereo DAC chip, controlled through I2C, with audio transmitted via I2S interface
- Onboard standard 3.5mm headphone jack, supports audio playback via external headphones
- Built-in RCA connector for use with speaker and other devices in a variety of scenarios
- Supports sampling frequency up to 384KHz
- Supports up to 32-bit resolution audio data
- Supports 2230 / 2242 size M.2 Solid State Drive or M.2 M KEY AI module
- Supports M.2 M KEY with up to 8 Gbps data rate
Based on 16PIN PCIe Interface of Raspberry Pi 5
* for reference only, please refer to the package content for detailed part list.
Compatible With 2230 / 2242 Size M.2 Solid State Drive, supports Gen2 Mode,
Supports M.2 M Key AI modules and Booting PI5 From Solid State Drive
Stereo decoder, controlled through I2C, with audio transmitted via I2S
* Only supports the NVMe Protocol Solid State Drives.
Faster reading/writing speed compared to the TF card slot of Raspberry Pi, greatly improving reading/writing efficiency of the system or files, Supports booting Pi5 from NVME Solid State Drive
*for reference only, the Raspberry Pi 5 board and other accessories are NOT included,
please refer to the package content for detailed part list.
Easy to monitor the Working Status
Onboard standard 3.5mm headphone jack, supports audio playback via external headphones, and features RCA connector for connecting external speaker
Used for automatic driver loading in Raspberry Pi OS
* Resources for different product may vary, please check the wiki page to confirm the actually provided resources.
Weight: 0.041 kg
Quick Overview
- M.2 PCM5122 AUDIO HAT x1
- 2*20pin header 2.54 mm pitch x1
- 16P-Cable-40mm x1
- Screws pack x1
