- Description
Details
NodeMCU-32S, ESP32 Development Board, WiFi / Bluetooth / UART / Keys / Extension Headers
Overview
This is the NodeMCU development board based on ESP32, features WiFi+Bluetooth connectivity, onboard CH340 and keys. What's more, all the I/O pins of ESP32-S module are accessible via the extension headers.
Thanks to the rich open-source resources, it supports development in various ways such as Lua/AT commands/MicroPython/Arduino/IOT source code, etc. helps you to fast prototype IoT applications.
Features
- Onboard ESP32-S module
- Onboard CH340, USB to UART converter
- USB port for power input, firmware programming, or UART debugging
- 2x19pin extension headers, breakout all the I/O pins of the module
- 2x keys, used as reset or user-defined
Revision log:
UART converter CH340 is used for new versions, instead of the CP2102. Most Windows systems should recognize it automatically, if not, please download and install the driver.
UART converter CH340 is used for new versions, instead of the CP2102. Most Windows systems should recognize it automatically, if not, please download and install the driver.
Specifications
- WIFI module: ESP32-S
- Processor: ESP32
- Built-in Flash: 32Mbit
- Antenna: Onboard PCB antenna
- Peripheral interface: UART/GPIO/ADC/DAC/SDIO/PWM/I2C/I2S
- WiFi protocol: IEEE 802.11 b/g/n
- Bluetooth: Bluetooth 4.2
- Frequency range: 2.4G ~ 2.5G (2400M ~ 2483.5M)
- WIFI mode: Station / SoftAP / SoftAP+Station
- Power supply: 5V
- Logic level: 3.3V
- Dimensions: 48.26mm x 25.4mm
Applications
The NodeMCU-32S suit for IOT applications such as:
- Smart home
- Intelligent building
- Industrial automation
- Wearable devices
- IP camera
- Intelligent agriculture
Pinouts
Development Resources
Weight: 0.01 kg
Quick Overview
- NodeMCU-32S x1
1
