ESP32-S3 1.8inch AMOLED Touch Display Development Board, 32-bit LX7 Dual-core Processor, 368×448 Pixels, Accelerometer And Gyroscope Sensor, ESP32 With Display

$27.99 - $29.99

Details

ESP32-S3 1.8inch AMOLED Touch Display Development Board, 32-bit LX7 Dual-core Processor, 368×448 Pixels, Accelerometer And Gyroscope Sensor, ESP32 With Display
ESP32-S3-Touch-AMOLED-1.8

Embedded with SH8601 Display Driver and FT3168 / FT6146 Capacitive Touch Chip

ESP32-S3 1.8inch touch display development board, front view ESP32-S3 1.8inch touch display development board, features
Version Options
ESP32-S3-Touch-AMOLED-1.8-EN

ESP32-S3-Touch-AMOLED-1.8-EN
Standard version, without Lithium battery

ESP32-S3-Touch-AMOLED-1.8

ESP32-S3-Touch-AMOLED-1.8
Comes with a 3.7V MX1.25 Lithium battery
(can be installed inside the case)

Features

ESP32-S3-Touch-AMOLED-1.8 is a low-cost, high-performance MCU board designed by Waveshare, tiny size, with onboard 1.8inch AMOLED display, power management IC, 6-axis sensor (3-axis accelerometer and 3-axis gyroscope), RTC, low power audio codec, and so on, which makes it easy for you to develop and integrate it into the products quickly.

Key features include:

  • Equipped with ESP32-S3R8 Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency
  • Supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE), with onboard antenna
  • Built in 512KB of SRAM and 384KB ROM, with onboard 8MB PSRAM and an external 16MB Flash memory
  • Type-C connector, improving device compatibility, easier to use
  • Onboard 1.8inch AMOLED display for clear color picture display, 368 × 448 resolution, 16.7M color
  • Built-in SH8601 display driver and FT3168 / FT6146 capacitive touch chip, using QSPI and I2C communication respectively, effectively saving the IO resources
  • Onboard QMI8658 6-axis IMU (3-axis accelerometer and 3-axis gyroscope) for detecting motion gesture, counting steps, etc.
  • Onboard PCF85063 RTC chip, powered by main Lithium battery through AXP2101 chip, with reserved RTC battery pads for connecting a backup battery, ensuring RTC function during the replacement of the main battery
  • Onboard PWR and BOOT programmable buttons for easy custom function development
  • Onboard 3.7V MX1.25 Lithium battery recharge/discharge header, optional for 3.7V Lithium battery
  • Reserved pads of 7 × GPIO, 1 × I2C, 1 × UART, and 1 × USB interface, for connecting peripherals and debugging
  • Onboard TF card slot for extended storage and fast data transfer, suitable for applications such as data recording and media playback, simplifying circuit design
  • Adopts AXP2101 IC for efficient power management, supports multiple voltage outputs, battery charging, battery management, and battery life optimization, etc.
  • Adopts AMOLED screen, featuring advantages of high contrast, wide viewing angle, rich colors, fast response, thinner design, and low power consumption, etc.

AMOLED parameters
Display Panel AMOLED Display Size 1.8 inch
Resolution 368 × 448 pixels Display Colors 16.7M
Brightness 350 cd/㎡ Contrast Ratio 100000:1
Communication Interface QSPI Driver IC SH8601
Touch Supported Touch IC FT3168 / FT6146

Small Size, Touch More Possibilities

Suitable For Various Smart Devices Development, Can Realize Human-Computer Interaction Function. Supports installing battery* inside the case for independent operation.

ESP32-S3 1.8inch touch display development board, touch demo
* Note: the Lithium battery is optional.

Adopts AMOLED screen

The next-generation display technology, compared to those traditional LCD displays, the AMOLED screen features precise light-control capability, representing more delicate colors, more picture details, and more vivid video image

ESP32-S3 Touch AMOLED 1.8, adopts AMOLED screen
178° wide viewing angle

Excellent Display Performance, 16.7M color, wide viewing angle

ESP32-S3 Touch AMOLED 1.8, with wide viewing angle

Onboard audio codec

Supports high-quality audio processing, providing clear and high-quality audio input and output

ESP32-S3 Touch AMOLED 1.8, onboard audio codec
Supports Offline Speech recognition and AI Speech Interaction

Allows access to online large model platforms to support more AI application scenarios

ESP32-S3 Touch AMOLED 1.8, allows accessing to online large model platforms

Supports ESP-IDF, Arduino

Comprehensive SDK, dev resources, tutorials to help you easily get started

ESP32-S3 Touch AMOLED 1.8, supports ESP-IDF, Arduino
Wi-Fi and BLE 5 support

ESP32-S3 integrates 2.4 GHz Wi-Fi (802.11 ax/b/g/n) with 40 MHz of bandwidth support, Its Bluetooth Low Energy subsystem supports Bluetooth 5 (LE) and Bluetooth Mesh

ESP32-S3 Touch AMOLED 1.8, with Wi-Fi and BLE 5 support
Dedicated black case, unique design

with removable back cover for easy embedded into the projects and DIY design

ESP32-S3 Touch AMOLED 1.8, with dedicated black case

What's On Board
ESP32-S3 1.8inch touch display development board, onboard components
  1. ESP32-S3R8
    The SoC with WiFi and Bluetooth, up to 240MHz operating frequency, with onboard 8MB PSRAM
  2. QMI8658
    6-axis IMU includes a 3-axis gyroscope and a 3-axis accelerometer
  3. PCF85063
    RTC chip
  4. AXP2101
    Highly integrated power management IC
  5. ES8311
    Low power mono audio codec
  6. Speaker
  7. Backup battery pads
    for connecting backup battery, ensuring RTC function during the replacement of the main battery
  1. MX1.25 Lithium battery header
    MX1.25 2P connector, for 3.7V Lithium battery (optional), supports charging and discharging. (To fit inside the case, a battery size of 3.85 × 24 × 28 mm is recommended)
  2. 16MB NOR-Flash
    for storing data
  3. Microphone
  4. Onboard antenna
    Supports 2.4 GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE)
  5. Reserved GPIO pads (pitch 1mm)
    Adapting available IO function pins for easy expansion
  6. BOOT button
    for device startup and function debugging
  7. USB Type-C port
    ESP32-S3 USB interface, for programming and log printing
  8. PWM button
    for system power supply ON/OFF, supports custom functions

Pin Definition
ESP32-S3 1.8inch touch display development board, pin definition

outline dimensions
ESP32-S3 1.8inch touch display development board, outline dimensions
ESP32 LCD Selection
Model Core Configuration display onboard resources Peripheral interfaces
CPU PSRAM Flash pixels Interface Display Touch IMU RTC TF Speaker mic battery
header
AMOLED display

ESP32-S3-Touch-AMOLED-2.41
ESP32-S3R8 8MB 16MB 600 × 450 QSPI RM690B0 FT6336 - - I2C, UART, USB, 34PIN GPIO header

ESP32-S3-Touch-AMOLED-2.41-B
ESP32-S3R8 8MB 16MB 600 × 450 QSPI RM690B0 FT6336 - - I2C, UART, USB, 34PIN GPIO header, with case

ESP32-C6-Touch-AMOLED-2.16
ESP32-C6 - 16MB 480 × 480 QSPI CO5300 CST9220 I2C, UART, USB, and GPIO pads

ESP32-S3-Touch-AMOLED-2.16
ESP32-S3R8 8MB 16MB 480 × 480 QSPI CO5300 CST9220 I2C, UART, USB, and GPIO pads

ESP32-S3-Touch-AMOLED-2.06
ESP32-S3R8 8MB 32MB 410 × 502 QSPI CO5300 FT3168 I2C, UART, and USB reserved pads

ESP32-C6-Touch-AMOLED-2.06
ESP32-C6 - 16MB 410 × 502 QSPI CO5300 FT3168 - I2C, UART, and USB reserved pads

ESP32-S3-Touch-AMOLED-1.91
ESP32-S3R8 8MB 16MB 240 × 536 QSPI RM67162 FT3168 - - - 40PIN header

ESP32-S3-AMOLED-1.91
ESP32-S3R8 8MB 16MB 240 × 536 QSPI RM67162 - - - - 40PIN header

ESP32-C6-Touch-AMOLED-1.8
ESP32-C6 - 16MB 368 × 448 QSPI SH8601 FT3168 / FT6146 I2C, UART, USB pads

ESP32-S3-Touch-AMOLED-1.8
ESP32-S3R8 8MB 16MB 368 × 448 QSPI SH8601 FT3168 / FT6146 I2C, UART, GPIO pads

ESP32-S3-Touch-AMOLED-1.75
ESP32-S3R8 8MB 16MB 466 × 466 QSPI CO5300 CST9217 I2C, UART, USB, 8PIN headers (2.54mm pitch)

ESP32-S3-Touch-AMOLED-1.75-B
ESP32-S3R8 8MB 16MB 466 × 466 QSPI CO5300 CST9217 I2C, UART, USB, 8PIN headers (2.54mm pitch)

ESP32-S3-Touch-AMOLED-1.75C
ESP32-S3R8 8MB 32MB 466 × 466 QSPI CO5300 CST9217 - - I2C, UART, USB, GPIO pads

ESP32-C6-Touch-AMOLED-1.64
ESP32-C6 - 16MB 280 × 456 QSPI CO5300 FT6146 - - - 22PIN header (2.54mm pitch)

ESP32-S3-Touch-AMOLED-1.64
ESP32-S3R8 8MB 16MB 280 × 456 QSPI CO5300 FT3168 - - - 2 × 11PIN headers (2.54mm pitch)

ESP32-C6-Touch-AMOLED-1.43
ESP32-C6 - 16MB 466 × 466 QSPI CO5300 FT6146 UART, I2C, 16PIN header (2.54mm pitch)

ESP32-C6-Touch-AMOLED-1.43-B
ESP32-C6 - 16MB 466 × 466 QSPI CO5300 FT6146 UART, I2C, 16PIN header (2.54mm pitch)

ESP32-S3-Touch-AMOLED-1.43
ESP32-S3R8 8MB 16MB 466 × 466 QSPI SH8601
/C05300
FT3168
/FT6146
- - I2C, UART, USB, 2 × 14PIN headers

ESP32-S3-Touch-AMOLED-1.43-B
ESP32-S3R8 8MB 16MB 466 × 466 QSPI SH8601
/C05300
FT3168
/FT6146
- - I2C, UART, USB, 2 × 14PIN headers

ESP32-S3-Touch-AMOLED-1.43C
ESP32-S3 8MB 8MB 466 × 466 QSPI CO5300 CST820 - - - I2C, UART, USB pads

ESP32-C6-Touch-AMOLED-1.32
ESP32-C6 - 16MB 466 × 466 QSPI CO5300 CST820 - - - SH1.0 12PIN header

ESP32-C6-Touch-AMOLED-1.32
ESP32-C6 - 16MB 466 × 466 QSPI CO5300 CST820 - - - SH1.0 12PIN header

ESP32-S3-Touch-AMOLED-1.32
ESP32-S3-PICO-1-N8R8 8MB 8MB 466 × 466 QSPI CO5300 CST820 - - - SH1.0 12PIN header
LCD display

ESP32-Touch-LCD-3.5
ESP32-D0WDR2-V3 2MB 16MB 320 × 480 SPI ST7796 FT6336 - 32PIN GPIO header

ESP32-S3-Touch-LCD-3.5
ESP32-S3R8 8MB 16MB 320 × 480 SPI ST7796 FT6336 32PIN GPIO header, camera interface

ESP32-S3-Touch-LCD-3.5-C
ESP32-S3R8 8MB 16MB 320 × 480 SPI ST7796 FT6336 32PIN GPIO header, camera interface

ESP32-S3-Touch-LCD-3.5B
ESP32-S3R8 8MB 16MB 320 × 480 QSPI AXS15231B AXS15231B 32PIN GPIO header, camera interface

ESP32-S3-Touch-LCD-3.5B-C
ESP32-S3R8 8MB 16MB 320 × 480 QSPI AXS15231B AXS15231B 32PIN GPIO header, camera interface

ESP32-S3-Touch-LCD-3.49
ESP32-S3R8 8MB 16MB 172 × 640 QSPI AXS15231B AXS15231B 22pin 2.54mm pitch pads

ESP32-S3-Touch-LCD-3.49B
ESP32-S3R8 8MB 16MB 172 × 640 QSPI AXS15231B AXS15231B 22pin 2.54mm pitch pads

ESP32-S3-LCD-3.16
ESP32-S3R8 8MB 16MB 320 × 820 RGB ST7701 - - - I2C, UART, USB headers

ESP32-S3-Touch-LCD-2.8
ESP32-S3R8 8MB 16MB 240 × 320 SPI ST7789 CST328 - I2C, UART, SH1.0 12PIN header

ESP32-S3-LCD-2.8
ESP32-S3R8 8MB 16MB 240 × 320 SPI ST7789 - - I2C, UART, SH1.0 12PIN header

ESP32-S3-Touch-LCD-2.8B
ESP32-S3R8 8MB 16MB 480 × 640 RGB ST7701 GT911 - - 20PIN header

ESP32-S3-LCD-2.8B
ESP32-S3R8 8MB 16MB 480 × 640 RGB ST7701 - - - 20PIN header

ESP32-S3-Touch-LCD-2.8C
ESP32-S3R8 8MB 16MB 480 × 480 RGB ST7701 GT911 - - I2C, UART, SH1.0 12PIN header

ESP32-S3-LCD-2.8C
ESP32-S3R8 8MB 16MB 480 × 480 RGB ST7701 - - - I2C, UART, SH1.0 12PIN header

ESP32-S3-Touch-LCD-2.1
ESP32-S3R8 8MB 16MB 480 × 480 RGB ST7701 CST820 - - I2C, UART, SH1.0 12PIN header

ESP32-S3-Touch-LCD-2.1B
ESP32-S3R8 8MB 16MB 480 × 480 RGB ST7701 CST820 - - I2C, UART, SH1.0 12PIN header

ESP32-S3-Touch-LCD-2
ESP32-S3R8 8MB 16MB 240 × 320 SPI ST7789T3 CST816 - - - 28PIN header, camera interface

ESP32-S3-LCD-2
ESP32-S3R8 8MB 16MB 240 × 320 SPI ST7789T3 - - - - 28PIN header, camera interface

ESP32-S3-Touch-LCD-1.9
ESP32-S3R8 8MB 16MB 170 × 320 SPI ST7789 CST816 - - - 40PIN header, compatible with Pico header

ESP32-S3-LCD-1.9
ESP32-S3R8 8MB 16MB 170 × 320 SPI ST7789 - - - - 40PIN header, compatible with Pico header

ESP32-C6-Touch-LCD-1.9
ESP32-C6FH8 - 8MB 170 × 320 SPI ST7789 CST816 - - - 40PIN header, compatible with Pico header

ESP32-C6-LCD-1.9
ESP32-C6FH8 - 8MB 170 × 320 SPI ST7789 - - - - 40PIN header, compatible with Pico header

ESP32-S3-Touch-LCD-1.85C
ESP32-S3R8 8MB 16MB 360 × 360 QSPI ST77916 CST816 - I2C, UART, 2×14PIN header (1.27mm pitch)

ESP32-S3-Touch-LCD-1.85C-BOX
ESP32-S3R8 8MB 16MB 360 × 360 QSPI ST77916 CST816 - I2C, UART, 2×14PIN header (1.27mm pitch)

ESP32-S3-Touch-LCD-1.85B
ESP32-S3R8 8MB 16MB 360 × 360 QSPI ST77916 CST816 UART, GPIO

ESP32-S3-Touch-LCD-1.85
ESP32-S3R8 8MB 16MB 360 × 360 QSPI ST77916 CST816 I2C, UART, GPIO pads

ESP32-S3-LCD-1.85
ESP32-S3R8 8MB 16MB 360 × 360 QSPI ST77916 - I2C, UART, GPIO pads

ESP32-S3-Touch-LCD-1.83
ESP32-S3R8 8MB 16MB 240 × 284 SPI ST7789P CST816D Reserved I2C, UART, USB pads

ESP32-C6-Touch-LCD-1.83
ESP32-C6 - 16MB 240 × 284 SPI ST7789P CST816D Reserved I2C, UART, USB pads

ESP32-C6-Touch-LCD-1.69
ESP32-C6 - 16MB 240 × 280 SPI ST7789V2 CST816T - Reserved USB, I2C, UART, and GPIO pads

ESP32-C6-LCD-1.69
ESP32-C6 - 16MB 240 × 280 SPI ST7789V2 - - Reserved USB, I2C, UART, and GPIO pads

ESP32-S3-Touch-LCD-1.69
ESP32-S3R8 8MB 16MB 240 × 280 SPI ST7789 CST816 - - - I2C, UART, GPIO pads

ESP32-S3-LCD-1.69
ESP32-S3R8 8MB 16MB 240 × 280 SPI ST7789 - - - - SH1.0 12PIN header

ESP32-C6-LCD-1.54
ESP32-C6 - 16MB 240 × 240 SPI ST7789 - - I2C, UART pads

ESP32-C6-Touch-LCD-1.54
ESP32-C6 - 16MB 240 × 240 SPI ST7789 CST816 - I2C, UART pads

ESP32-S3-LCD-1.54
ESP32-S3R8 8MB 16MB 240 × 240 SPI ST7789 - - I2C, UART pads

ESP32-S3-Touch-LCD-1.54
ESP32-S3R8 8MB 16MB 240 × 240 SPI ST7789 CST816 - I2C, UART pads

ESP32-S3-Touch-LCD-1.47
ESP32-S3R8 8MB 16MB 172 × 320 SPI JD9853 AXS5106L - - - - 22PIN header

ESP32-S3-LCD-1.47
ESP32-S3R8 8MB 16MB 172 × 320 SPI ST7789 - - - - - - 18PIN header

ESP32-S3-LCD-1.47B
ESP32-S3R8 8MB 16MB 172 × 320 SPI ST7789 - - - - 18PIN header

ESP32-C6-Touch-LCD-1.47
ESP32-C6FH8 - 8MB 172 × 320 SPI JD9853 AXS5106L - - - 22PIN header

ESP32-C6-LCD-1.47
ESP32-C6FH8 - 8MB 172 × 320 SPI ST7789 - - - - - - 18PIN header

ESP32-C3-LCD-1.47
ESP32-C3FH4 - 4MB 172 × 320 SPI ST7789 - - - - - - 18PIN header

ESP32-S3-Touch-LCD-1.46B
ESP32-S3R8 8MB 16MB 412 × 412 QSPI SPD2010 SPD2010 20pin GPIO header

ESP32-S3-Touch-LCD-1.46
ESP32-S3R8 8MB 16MB 412 × 412 QSPI SPD2010 SPD2010 20pin GPIO header

ESP32-C6-LCD-1.3
ESP32-C6FH4 - 4MB 240 × 240 SPI ST7789 - - - - - - 2.54mm 12PIN header

ESP32-C6-LCD-1.3-M
ESP32-C6FH4 - 4MB 240 × 240 SPI ST7789 - - - - - - 2.54mm 12PIN header

ESP32-S3-LCD-1.3
ESP32-S3R8 8MB 16MB 240 × 240 SPI ST7789 - - - - 2.54mm 16PIN header

ESP32-S3-LCD-1.3-B
ESP32-S3R8 8MB 16MB 240 × 240 SPI ST7789 - - - - 2.54mm 16PIN header, with case

ESP32-S3-LCD-1.3-C
ESP32-S3R8 8MB 16MB 240 × 240 SPI ST7789 - - - - 2.54mm 16PIN header, with case and prism cube

ESP32-S3-Touch-LCD-1.28
ESP32-S3R2 2MB 16MB 240 × 240 SPI GC9A01A CST816 - - - - SH1.0 12PIN header

ESP32-S3-LCD-1.28
ESP32-S3R2 2MB 16MB 240 × 240 SPI GC9A01A - - - - - 2 × 20PIN header (1.27mm pitch)

ESP32-C3-LCD-0.71
ESP32-C3FH4 - 4MB 160 × 160 SPI GC9D01 - - - - - - 12PIN GPIO pads

ESP32-S3-LCD-0.85
ESP32-S3 8MB 8MB 128 × 128 SPI GC9107 - - - I2C, UART pads

ESP32-C6-LCD-0.85
ESP32-C6 - 8MB 128 × 128 SPI ST7735 - - - I2C, UART pads

ESP32-C6-GEEK
ESP32-C6 - 16MB 240 × 135 SPI ST7789P3 - - - - - - I2C, UART, GPIO

ESP32-S3-GEEK
ESP32-S3R2 2MB 16MB 240 × 135 SPI ST7789P3 - - - - - - I2C, UART, GPIO

Quick Overview

  1. ESP32-S3-Touch-AMOLED-1.8 x1
  2. OPTIONS 3.7V MX1.25 Lithium battery ×1
1ESP32-S3-Touch-AMOLED-1.8
2