XNUCLEO-F103RB Package B

XNUCLEO-F103RB Package B

SKU: 11125
Part Number: XNUCLEO-F103RB Package B
Brand: Waveshare
UPC: 712321341440

$61.99
$60.292+
$59.293+
$58.694+

Select Version:

Share:
Description

Details

XNUCLEO-F103RB Development Kit, Comes with Common Used Peripheral Shields, OLED, RTC, AD/DA, Audio Codec, RS485, CAN ...

Overview

This development kit includes :

  • XNUCLEO-F103RB (STM32 Development Board, Supports Arduino, Compatible with NUCLEO-F103RB)
  • Accessory Shield (0.96inch OLED, high precision RTC, 3-axis accelerometer, temperature sensor, RGB LED, etc.)
  • Analog Test Shield (AD acquisition, DA output test)
  • Music Shield (Audio codec, music playing, recording)
  • RS485 CAN Shield (RS485 and CAN communication)

XNUCLEO-F103RB Features

  • Compatible with NUCLEO-F103RB, onboard Cortex-M3 microcontroller STM32F103RBT6
  • Arduino connectivity support, easy to connect with various Arduino shields and access the massive Arduino resources
  • ST Morpho headers provide full access to all STM32 I/Os, easy for peripheral expansion
  • Supports mbed, build prototype quickly by mbed SDK and online tools
  • Comprehensive free software HAL library including a variety of software examples
  • Comes with a separated ST-LINK/V2 module

Advantages

CompareXNUCLEONUCLEORemarks
Arduino compatibility UNO, Leonardo UNO XNUCLEO can be configured by jumper to compatible with UNO (default) or Leonardo
Arduino ICSP interface Yes None ICSP is required by certain kinds of shields
USB connectivity Yes None The USB connector of NUCLEO is for debugging ONLY, not available for USB connection
USB connector Micro USB Mini USB Micro USB is the advanced USB standard
Morpho headers mark Most None Now you can check the PCB mark instead of datasheet
Common interfaces are connected via Jumpers 0Ω resistors Jumpers are much easier to use, need no soldering
UART debugging Available while in-circuit debugging Not available while in-circuit debugging The NUCLEO integrated ST-LINK/V2 functional chip can be simulated as serial port, however, it's not available while in-circuit debugging, whereas XNUCLEO features a stand-alone USB TO UART chip.
8MHz crystal Yes None Timer is more accurate when using external 8MHz crystal
32.768KHz crystal Yes None Required for RTC
USB fuse Yes (500mA) None The computer USB interface might be harmed without fuse
LEDs 4 1 The more LEDs, the easier to monitor program running status
UART indicator Yes None Data communication is visible now
DC input Yes None A convenience
Button position Close to PCB edge Close to Arduino connector The button won't be untouchable when connecting with an Arduino shield if it were close to the PCB edge
ST-LINK Separated Integrated ST-LINK can be used anywhere else
Comes with USB cable Yes None  

What's on the XNUCLEO-F103RB

XNUCLEO-F103RB STM32 development board on board resource

  1. STM32F103RBT6
    • Core : ARM® 32-bit Cortex™-M3
    • Operating frequency : 72MHz
    • Operating voltage : 2.0V-3.6V
    • Package : LQFP64
    • Memories : 128kB Flash, 20kB SRAM
    • Interfaces : 2 x SPI, 3 x USART, 2 x I2C, 1 x CAN, 1 x USB
    • AD/DA : 2 x AD (12 bit, 16 channels)
  2. SPX3819M5 : 3.3V voltage regulator
  3. AMS1117-5.0 : 5.0V voltage regulator
  4. CP2102 : USB to UART convertor
  5. Arduino connector : for connecting Arduino shields
  6. ICSP interface : Arduino ICSP
  7. USB TO UART : for debugging
  8. USB connector : USB communication interface
  9. SWD interface : for programming and debugging
  10. ST Morpho headers : access to VCC, GND and all the I/Os, easy for expansion
  11. 6-12V DC input
  12. User button
  13. Reset button
  14. Power indicator
  15. User LED
  16. 500mA fast self-recovery fuse
  17. Serial port Rx/Tx indicator
  18. 8MHz crystal
  19. 32.768KHz crystal
  20. ADC/I2C selection jumper
    • short A and B : Arduino A4, A5 is used as I2C
    • short B and C : Arduino A4, A5 is used as ADC
  21. UART selection jumper
  22. MCU current test jumper : for low power tests
  23. Power selection jumper
    • short 5V and U5V : powered from USB connection
    • short 5V and E5V : powered from external power supply
  24. USB enable jumper
    • short the jumper to enable
    • open the jumper to disable
  25. User button jumper
    • short the jumper to connect to I/Os used in example code
    • open the jumper to connect to other custom pins via jumper wires
  26. User LED jumper
    • short the jumper to connect to I/Os used in example code
    • open the jumper to connect to other custom pins via jumper wires

XNUCLEO-F103RB Expansion Headers

XNUCLEO-F103RB STM32 development board XNUCLEO-F103RB STM32 development board

XNUCLEO-F103RB Photos

XNUCLEO-F103RB STM32 development board
XNUCLEO-F103RB STM32 development board
XNUCLEO-F103RB STM32 development board
XNUCLEO-F103RB STM32 development board
XNUCLEO-F103RB STM32 development board
XNUCLEO-F103RB STM32 development board back view
XNUCLEO-F103RB STM32 development board
Connecting with ST-LINK/V2 (mini)

Included Shields

Connecting with Accessory Shield
Connecting with Accessory Shield
Connecting with Analog Test Shield
Connecting with Analog Test Shield
Connecting with Music Shield
Connecting with Music Shield
Connecting with RS485 CAN Shield
Connecting with RS485 CAN Shield

XNUCLEO-F103RB Dimension

Development Resources

Wiki : www.waveshare.com/wiki/XNUCLEO-F103RB

Package Content

Weight: 0.35 kg

Quick Overview

  1. XNUCLEO-F103RB x 1
  2. ST-LINK/V2 (mini) x 1
  3. USB Type A Plug to Micro B Plug Cable x 1
  4. USB Type A Plug to Receptacle Cable x 1
  5. Accessory Shield x 1
  6. Analog Test Shield x 1
  7. Music Shield x 1
  8. Micro SD Card 16GB x 1
  9. RS485 CAN Shield x 1
1
2
3
4
5
6
7
8
9