Dual-Mode Bluetooth Module for Raspberry Pi Pico, SPP / BLE, Bluetooth 5.1

SKU: 21474
Part Number: Pico-BLE
Brand: Waveshare

Bulk purchase only



Dual-mode Bluetooth module for Raspberry Pi Pico, SPP / BLE, Bluetooth 5.1 wireless
Dual-mode Bluetooth module for Pico
Features at a glance

The Pico-BLE is a dual-mode Bluetooth 5.1 expansion module designed for Raspberry Pi Pico, which is controlled via UART AT commands, with SPP and BLE support. Combined with the Raspberry Pi Pico, it can be used for Bluetooth wireless communication applications.

  • Standard Raspberry Pi Pico header, supports Raspberry Pi Pico series
  • Controlled via UART AT commands, get started quickly
  • Comes with development resources and manual (Raspberry Pi Pico C/C++ and MicroPython examples)
Bluetooth module dual-mode Bluetooth to UART module
Transmission distance 30m (open air)
Communication UART
Antenna Onboard PCB antenna
Transmission cache 1K bytes UART cache,
it is recommended to transmit less than 512 bytes per transmission for SPP
UART baudrate 13 different baudrate configuration, 115200 bps by default
Input voltage 5V / 3.3V
Operating current Startup transient current: about 25mA for about 300ms;
Stable status current: about 6mA, non low power mode;
Low power mode current: refer to user manual
Operating temperature -40℃ ~ 80℃
Operating humidity 5% ~ 95%
Dimensions 56.5 × 21 (mm)
Raspberry Pi Pico header compatibility

onboard female pin header for direct attaching to Raspberry Pi Pico,
stackable design

for reference ONLY, Raspberry Pi Pico is NOT included.
What's On Board
  1. Bluetooth module
  2. RT9193-33
    3.3V regulator
  1. Raspberry Pi Pico header
  2. UART input pins selection
  3. Onboard Bluetooth antenna
Pinout definition
Outline dimensions
Resources & Services


* Resources for different product may vary, please check the wiki page to confirm the actually provided resources.

Weight: 0.01 kg

Quick Overview

  1. Pico-BLE x1