Open1788 Standard, LPC Development Board

SKU: 6383
Part Number: Open1788 Standard
Brand: Waveshare

$70.99 DISCONTINUED
$68.892+
$67.493+
$66.894+

Description

Details

LPC development board designed for the LPC1788FBD208 MCU, and integrates various standard interfaces, pretty easy for peripheral expansions.

LPC1788FBD208 development board

Overview

Open1788 is an LPC development board designed for the LPC1788FBD208 microcontroller, consists of the mother board and the MCU core board Core1788.

The Open1788 supports further expansion with various optional accessory boards for specific application. The modular and open design makes it the ideal for starting application development with NXP LPC series microcontrollers.


What's on board

LPC1788FBD208 development board on board resource

  1. LPC1788FBD208 (core board):the high performance LPC MCU which features:
    • Core: Cortex-M3 32-bit RISC
    • Operating Frequency: 120MHz Max
    • Operating Voltage: 2.4-3.6V (3.3V typical)
    • Package: LQFP208
    • I/Os: 165
    • Memories: 512KB Flash, 96KB SRAM, 4K EEPROM
    • MCU communication Interfaces:
      • 1 x LCD, 1 x 10/100 ETH MAC, 1 x GP DMA Controller
      • USB Device/Host (Onchip PHY and DMA Controller)
      • 5 x UART, 3 x SSP, 3 x I2C, 1 x I2S, 2 x CAN,1 x SDIO
      • 8 x 12Bit ADC, 1 x 10Bit ADC, 1 x DAC, 1 x MOTOR PWM
      • 6 x GP PWM, 1 x Quadrature Encoder Interface, 1 x EMC
    • AD & DA converters: 3 x AD (12-bit, 1μs, shares 24 channels); 2 x DA (12-bit)
    • Debugging/Programming: supports JTAG/SWD (serial wire debug) interfaces, supports ISP via UART
  2. H57V1262GTR-75C (core board): 2PCS x 128M Bit SDRAM
  3. K9F1G08U0B (core board): 1G Bit NandFlash
  4. SST39VF3201 (core board): 32M Bit NorFlash
  5. LM3526-L (mother board bottom side): onboard USB power switch and over-current protection
  6. AMS1117-3.3, 3.3V voltage regulator
  7. Power supply switch
  8. Power indicator
  9. LEDs: convenient for indicating I/O status and/or program running state
  10. USB communication LED1: USB GOOD LINK1
  11. USB communication LED2: USB GOOD LINK2
  12. Reset button
  13. User key: convenient for I/O input and/or interact with running code
  14. Joystick: five positions
  15. 12M crystal oscillator (core board): used to boost operating frequency by frequency multiplication
  16. 32.768K crystal (core board), for internal RTC with calibration
  17. USB type A interface: for connecting USB devices such as USB flash drive
  18. CAN2 interface: communicates with accessory boards which feature the CAN device conveniently
  19. CAN1 interface: communicates with accessory boards which feature the CAN device conveniently
  20. AD+DA interface: for AD/DA testing
  21. USB OTG transceiver interface: for connecting USB OTG transceiver module
  22. SPI0 | SPI1 interface:easily connects to SPI peripherals such as DataFlash (AT45DBxx), SD card, MP3 module, etc.
  23. I2C1 | I2C2 interface: easily connects to I2C peripherals such as I/O expander (PCF8574), EEPROM (AT24Cxx), etc.
  24. I2S | I2C0 interface: for connecting I2S and/or I2C modules such as audio module, FRAM FM24CLxx, etc.
  25. Modem | UART1 interface: for connecting Modem and/or UART modules such as RS232, RS485, USB TO UART, etc.
  26. SDIO interface: for connecting Micro SD module, features much faster access speed rather than SPI
  27. Ethernet interface: easily connects the MCU to ethernet network by using an additional ethernet module, such as DP83848 Ethernet Board
  28. ISP | UART0 interface: for connecting ISP and/or UART modules such as RS232, RS485, USB TO UART, etc.
  29. ONE-WIRE interface: easily connects to ONE-WIRE devices (TO-92 package), such as temperature sensor (DS18B20), electronic registration number (DS2401), etc.
  30. LCD interface: for connecting to 4.3 inch touch screen LCD through an adapter
  31. USB mini interface: used for establishing USB communication between PC and the LPC development board
  32. 5V DC jack
  33. 5V/3.3 V power input/output: usually used as power output, also common-grounding with other user board
  34. MCU pins connector: all the idle pins are accessible on expansion connectors for further expansion
  35. JTAG/SWD interface: for debugging/programming
  36. LEDs jumper
  37. User key jumper
  38. Joystick jumper
  39. SD card detect jumper
    • short the jumper to enable SD card detection function
    • open the jumper to disconnect from I/O port
  40. USB enable jumper
    • short the jumper to enable USB
    • open the jumper to disconnect from I/O port
  41. USB HOST jumper
    • short the jumper when using USB HOST
    • open the jumper to disconnect from I/O port
  42. VBAT selection jumper
    • short the jumper to use the onboard battery
    • open the jumper to connect the VBAT to other external power
  43. VREFP selection jumper
    • short the jumper to connect VREFP to VCC
    • open the jumper to connect VREFP to other custom pin via jumper wire

For jumpers 36-38:

  • short the jumper to connect to I/Os used in example code
  • open the jumper to connect to other custom pins via jumper wires

Photos

LPC Development Board
Open1788 development board
LPC Development Board
Open1788 development board
LPC Development Board
Open1788 development board back view
LPC Development Board
Open1788 mother board
LPC MCU Core Board
MCU core board Core1788
LPC MCU Core Board
MCU core board Core1788
LPC Development Board
Connecting to a debugger
LPC Development Board
Connecting to various peripherals
Open1788 emWin demo
Open1788 emWin demo 1
Open1788 emWin demo
Open1788 emWin demo 2
Open1788 emWin demo
Open1788 emWin demo 3
Open1788 emWin demo
Open1788 emWin demo 4
USB Device
Connecting to USB device
USB3300 USB HS Board
Connecting to LPC ISP (mini)
RS232 Board
Connecting to RS232 Board
RS485 Board
Connecting to RS485 Board
PL2303 USB UART Board mini
Connecting to USB UART Board
SN65HVD230 CAN Board
Connecting to CAN Board
8 Push Buttons
Connecting to 8 Push Buttons
5 IO Keypad
Connecting to 5 IO Keypad
AD Keypad
Connecting to AD Keypad
Analog Test Board
Test Board on the AD/DA port
FM24CLXX FRAM Board
Connecting to FRAM Board
I2C cascading x3
Multi I2C peripheral Module connected to the I2C bus
Micro SD Storage Board
Connecting to Micro SD Storage Board
AT45DBXX DataFlash Board
Connecting to DataFlash Board
NRF24L01 RF Board
Connecting to NRF24L01 RF Board
DP83848 Ethernet Board
Connecting to Ethernet Board
VS1003B MP3 Board
Connecting to VS1003B MP3 Board
Connecting to any accessory board
Connecting to any accessory board you need

Note:
The Open1788 supports programming via UART bootloader, a USB TO UART accessory board is also provided in the package.
The Open1788 does NOT integrate any debugging function, a debugger is required.


JTAG/SWD interfaces

The figure 1, and 2 show the header pinouts of JTAG/SWD interface

Figure 1. JTAG Header Pinout
JTAG Header Pinout
Figure 2. SWD Header Pinout
SWD Header Pinout

Development Resources

The User Guide CD includes development resources listed as follow:

  • Related software (KEIL etc.)
  • Examples in C
  • Schematic (PDF)
  • LPC Cortex-M3 development documentations (Datasheet etc.)

Wiki: www.waveshare.com/wiki/Open1788


As all the shipping services have suspended parcels containing batteries, to avoid delivery delay, the battery in this product will be removed.

Sorry for the trouble, we appreciate your business!

Weight: 0.27 kg

Quick Overview

  1. Open1788 development board x 1
  2. LPC ISP (mini) x 1
  3. USB type A plug to mini-B plug cable x 1
  4. 4-pin 2-pin wires pack x 1
  5. USB power cable x 1
  6. Software CD x 1
1
2
3
4
5
6