ESP32-S3 0.85inch LCD Display Development Board, 128 × 128 Resolution, Onboard Dual Microphones Array And Surround RGB LEDs, Supports 2.4GHz Wi-Fi And BLE 5
WiFi, Bluetooth, ESP32-S3, AI Chat, LCD (SPI/QSPI)

ESP32-S3 0.85inch LCD Display Development Board, 128 × 128 Resolution, Onboard Dual Microphones Array And Surround RGB LEDs, Supports 2.4GHz Wi-Fi And BLE 5

$14.99 - $15.99
3.7V MX1.25 Lithium Batt
IncludedNOT Included
Share:

Details

ESP32-S3 0.85inch LCD Display Development Board, 128 × 128 resolution, Onboard Dual Microphones Array and surround RGB LEDs, Supports 2.4GHz Wi-Fi and BLE 5
ESP32-S3 0.85inch LCD display
development board

Supports AI Speech Interaction, Online LLM Platforms, And DIY Customization

ESP32-S3 0.85inch LCD display development board, front view
  • ProcessorLX7 Dual-core Processor
  • Wi-Fi2.4GHz Wi-Fi
  • BluetoothBLE 5
  • AntennaOnboard Antenna
  • Power SupplyType-C Port
  • Size0.85"
  • Resolution128 × 128
  • Display Color65K Color
  • InterfaceSPI
  • Driver ICGC9107
  • Card SlotTF Card Slot
  • Audio PlaybackES8311
  • Audio CaptureOnboard Dual-MIC
  • ButtonProgrammable Button
  • RGBRGB Ambient Light

Version Options
ESP32-S3-LCD-0.85

ESP32-S3-LCD-0.85
Comes with a 3.7V Lithium Batt
(can be installed inside the case)

ESP32-S3-LCD-0.85-EN

ESP32-S3-LCD-0.85-EN
without Lithium Batt

Features

The ESP32-S3-LCD-0.85 is a microcontroller development board that supports 2.4GHz Wi-Fi and Bluetooth BLE 5. It features a custom-molded square plastic case, offering a compact and premium appearance. Onboard 0.85inch IPS color LCD display, TF card slot, 8 × surround RGB LEDs, low-power audio codec chip, and so on, enabling convenient development of multimedia and interactive applications. With these hardware resources, this product supports functions such as image display, audio playback, and lighting effects control, making it suitable for rapid prototyping and integration into end products for customized expansion and secondary development.

  • Equipped with high-performance Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency
  • Supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE), with onboard antenna
  • Built-in 512KB Static RAM, 384KB ROM, 8MB Flash memory, and 8MB PSRAM
  • Type-C port, improving device compatibility, easier to use
  • Onboard 0.85inch LCD display, 128 × 128 resolution, 65K color
  • Onboard 8 × surround RGB LEDs, programmable for multiple dynamic lighting effects
  • Onboard 3.7V MX1.25 Lithium Batt recharge/discharge header
  • Adapting I2C, UART, and other pin pads for external device connection and debugging, enabling flexible peripheral configuration
  • Onboard TF card slot for extended storage and fast data transfer, suitable for applications such as data recording and media playback, simplifying circuit design
  • Onboard ES8311 audio codec chip, dual microphones module, and other resources

LCD parameters
Operating voltage 3.3V/5V Display Size 15.21 × 15.21 (mm)
Resolution 128 × 128 pixels Display Color 65K
Display panel IPS Pixel pitch 39.6 × 118.8 (um)
communication interface 4-wire SPI Driver IC GC9107

Onboard audio codec

Supports high-quality audio processing, providing clear and high-quality audio input and output

ESP32-S3 0.85inch LCD display development board, Onboard audio codec
Supports AI Speech Interaction

Allows access to online large model platforms such as DeepSeek, Doubao, etc.

ESP32-S3 0.85inch LCD, allows accessing to online large model platforms ESP32-S3 0.85inch LCD, AI speech interaction demo


Wi-Fi and BLE 5 support

ESP32-S3 integrates 2.4 GHz Wi-Fi (802.11 b/g/n) with 40 MHz of bandwidth support,
Its Bluetooth Low Energy subsystem supports Bluetooth 5 (LE) and Bluetooth Mesh

ESP32-S3 0.85inch LCD, with Wi-Fi and BLE 5 support
Surround RGB lighting effects

Onboard 8 × surround RGB LEDs, programmable for multiple dynamic lighting effects

ESP32-S3 0.85inch LCD display development board, High-quality aluminium alloy casing
Supports ESP-IDF, Arduino IDE

Comprehensive SDK, Dev Resources, Tutorials To Help You Easily Get Started

ESP32-S3 0.85inch LCD, supports ESP-IDF ESP32-S3 0.85inch LCD, supports Arduino
What's On Board
ESP32-S3 0.85inch LCD display development board, onboard components
  1. ESP32-S3-PICO-1-N8R8
    Dual-core processor, up to 240MHz operating frequency, with built-in 8MB Flash and 8MB PSRAM
  2. NS4150
    audio power amplifier chip
  3. ES8311 audio codec chip
  4. Batt recharge and discharge management chip
  5. ES7210
  6. PLUS button
  7. PWR power button
    for system power supply ON/OFF, supports custom function
  8. BOOT button
    for device startup and function debugging
  1. Microphones
  2. TF card slot
  3. Onboard antenna
    supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE)
  4. Batt header
    MX1.25 2PIN connector, for 3.7 Lithium Batt, supports charging and discharging
  5. USB Type-C port
    ESP32-S3 USB port for programming and log printing
  6. Speaker header
outline dimensions

ESP32-S3 0.85inch LCD display development board, outline dimensions
Resources & Services
Wiki: docs.waveshare.com/ESP32-S3-LCD-0.85
ESP32 LCD Selection
Model Core Configuration display onboard resources Peripheral interfaces
CPU PSRAM Flash pixels Interface Display Touch IMU RTC TF Speaker mic battery
header
AMOLED display

ESP32-S3-Touch-AMOLED-2.41		 ESP32-S3R8 8MB 16MB 600 × 450 QSPI RM690B0 FT6336 √ √ √ - - √ I2C, UART, USB, 34PIN GPIO header

ESP32-S3-Touch-AMOLED-2.41-B		 ESP32-S3R8 8MB 16MB 600 × 450 QSPI RM690B0 FT6336 √ √ √ - - √ I2C, UART, USB, 34PIN GPIO header, with case

ESP32-C6-Touch-AMOLED-2.16		 ESP32-C6 - 16MB 480 × 480 QSPI CO5300 CST9220 √ √ √ √ √ √ I2C, UART, USB, and GPIO pads

ESP32-S3-Touch-AMOLED-2.16		 ESP32-S3R8 8MB 16MB 480 × 480 QSPI CO5300 CST9220 √ √ √ √ √ √ I2C, UART, USB, and GPIO pads

ESP32-S3-Touch-AMOLED-2.06		 ESP32-S3R8 8MB 32MB 410 × 502 QSPI CO5300 FT3168 √ √ √ √ √ √ I2C, UART, and USB reserved pads

ESP32-C6-Touch-AMOLED-2.06		 ESP32-C6 - 16MB 410 × 502 QSPI CO5300 FT3168 √ √ - √ √ √ I2C, UART, and USB reserved pads

ESP32-S3-Touch-AMOLED-1.91		 ESP32-S3R8 8MB 16MB 240 × 536 QSPI RM67162 FT3168 √ - √ - - √ 40PIN header

ESP32-S3-AMOLED-1.91		 ESP32-S3R8 8MB 16MB 240 × 536 QSPI RM67162 - √ - √ - - √ 40PIN header

ESP32-C6-Touch-AMOLED-1.8		 ESP32-C6 - 16MB 368 × 448 QSPI SH8601 FT3168 / FT6146 √ √ √ √ √ √ I2C, UART, USB pads

ESP32-S3-Touch-AMOLED-1.8		 ESP32-S3R8 8MB 16MB 368 × 448 QSPI SH8601 FT3168 / FT6146 √ √ √ √ √ √ I2C, UART, GPIO pads

ESP32-S3-Touch-AMOLED-1.75		 ESP32-S3R8 8MB 16MB 466 × 466 QSPI CO5300 CST9217 √ √ √ √ √ √ I2C, UART, USB, 8PIN headers (2.54mm pitch)

ESP32-S3-Touch-AMOLED-1.75-B		 ESP32-S3R8 8MB 16MB 466 × 466 QSPI CO5300 CST9217 √ √ √ √ √ √ I2C, UART, USB, 8PIN headers (2.54mm pitch)

ESP32-S3-Touch-AMOLED-1.75C		 ESP32-S3R8 8MB 32MB 466 × 466 QSPI CO5300 CST9217 √ - - √ √ √ I2C, UART, USB, GPIO pads

ESP32-C6-Touch-AMOLED-1.64		 ESP32-C6 - 16MB 280 × 456 QSPI CO5300 FT6146 √ - √ - - √ 22PIN header (2.54mm pitch)

ESP32-S3-Touch-AMOLED-1.64		 ESP32-S3R8 8MB 16MB 280 × 456 QSPI CO5300 FT3168 √ - √ - - √ 2 × 11PIN headers (2.54mm pitch)

ESP32-C6-Touch-AMOLED-1.43		 ESP32-C6 - 16MB 466 × 466 QSPI CO5300 FT6146 √ √ √ √ √ √ UART, I2C, 16PIN header (2.54mm pitch)

ESP32-C6-Touch-AMOLED-1.43-B		 ESP32-C6 - 16MB 466 × 466 QSPI CO5300 FT6146 √ √ √ √ √ √ UART, I2C, 16PIN header (2.54mm pitch)

ESP32-S3-Touch-AMOLED-1.43		 ESP32-S3R8 8MB 16MB 466 × 466 QSPI SH8601
/C05300		 FT3168
/FT6146		 √ √ √ - - √ I2C, UART, USB, 2 × 14PIN headers

ESP32-S3-Touch-AMOLED-1.43-B		 ESP32-S3R8 8MB 16MB 466 × 466 QSPI SH8601
/C05300		 FT3168
/FT6146		 √ √ √ - - √ I2C, UART, USB, 2 × 14PIN headers

ESP32-S3-Touch-AMOLED-1.43C		 ESP32-S3 8MB 8MB 466 × 466 QSPI CO5300 CST820 - - - √ √ √ I2C, UART, USB pads

ESP32-C6-Touch-AMOLED-1.32		 ESP32-C6 - 16MB 466 × 466 QSPI CO5300 CST820 - - - √ √ √ SH1.0 12PIN header

ESP32-C6-Touch-AMOLED-1.32		 ESP32-C6 - 16MB 466 × 466 QSPI CO5300 CST820 - - - √ √ √ SH1.0 12PIN header

ESP32-S3-Touch-AMOLED-1.32		 ESP32-S3-PICO-1-N8R8 8MB 8MB 466 × 466 QSPI CO5300 CST820 - - - √ √ √ SH1.0 12PIN header
LCD display

ESP32-Touch-LCD-3.5		 ESP32-D0WDR2-V3 2MB 16MB 320 × 480 SPI ST7796 FT6336 - √ √ √ √ √ 32PIN GPIO header

ESP32-S3-Touch-LCD-3.5		 ESP32-S3R8 8MB 16MB 320 × 480 SPI ST7796 FT6336 √ √ √ √ √ √ 32PIN GPIO header, camera interface

ESP32-S3-Touch-LCD-3.5-C		 ESP32-S3R8 8MB 16MB 320 × 480 SPI ST7796 FT6336 √ √ √ √ √ √ 32PIN GPIO header, camera interface

ESP32-S3-Touch-LCD-3.5B		 ESP32-S3R8 8MB 16MB 320 × 480 QSPI AXS15231B AXS15231B √ √ √ √ √ √ 32PIN GPIO header, camera interface

ESP32-S3-Touch-LCD-3.5B-C		 ESP32-S3R8 8MB 16MB 320 × 480 QSPI AXS15231B AXS15231B √ √ √ √ √ √ 32PIN GPIO header, camera interface

ESP32-S3-Touch-LCD-3.49		 ESP32-S3R8 8MB 16MB 172 × 640 QSPI AXS15231B AXS15231B √ √ √ √ √ √ 22pin 2.54mm pitch pads

ESP32-S3-Touch-LCD-3.49B		 ESP32-S3R8 8MB 16MB 172 × 640 QSPI AXS15231B AXS15231B √ √ √ √ √ √ 22pin 2.54mm pitch pads

ESP32-S3-LCD-3.16		 ESP32-S3R8 8MB 16MB 320 × 820 RGB ST7701 - √ √ √ - - √ I2C, UART, USB headers

ESP32-S3-Touch-LCD-2.8		 ESP32-S3R8 8MB 16MB 240 × 320 SPI ST7789 CST328 √ √ √ √ - √ I2C, UART, SH1.0 12PIN header

ESP32-S3-LCD-2.8		 ESP32-S3R8 8MB 16MB 240 × 320 SPI ST7789 - √ √ √ √ - √ I2C, UART, SH1.0 12PIN header

ESP32-S3-Touch-LCD-2.8B		 ESP32-S3R8 8MB 16MB 480 × 640 RGB ST7701 GT911 √ √ √ - - √ 20PIN header

ESP32-S3-LCD-2.8B		 ESP32-S3R8 8MB 16MB 480 × 640 RGB ST7701 - √ √ √ - - √ 20PIN header

ESP32-S3-Touch-LCD-2.8C		 ESP32-S3R8 8MB 16MB 480 × 480 RGB ST7701 GT911 √ √ √ - - √ I2C, UART, SH1.0 12PIN header

ESP32-S3-LCD-2.8C		 ESP32-S3R8 8MB 16MB 480 × 480 RGB ST7701 - √ √ √ - - √ I2C, UART, SH1.0 12PIN header

ESP32-S3-Touch-LCD-2.1		 ESP32-S3R8 8MB 16MB 480 × 480 RGB ST7701 CST820 √ √ √ - - √ I2C, UART, SH1.0 12PIN header

ESP32-S3-Touch-LCD-2.1B		 ESP32-S3R8 8MB 16MB 480 × 480 RGB ST7701 CST820 √ √ √ - - √ I2C, UART, SH1.0 12PIN header

ESP32-S3-Touch-LCD-2		 ESP32-S3R8 8MB 16MB 240 × 320 SPI ST7789T3 CST816 √ - √ - - √ 28PIN header, camera interface

ESP32-S3-LCD-2		 ESP32-S3R8 8MB 16MB 240 × 320 SPI ST7789T3 - √ - √ - - √ 28PIN header, camera interface

ESP32-S3-Touch-LCD-1.9		 ESP32-S3R8 8MB 16MB 170 × 320 SPI ST7789 CST816 √ - √ - - √ 40PIN header, compatible with Pico header

ESP32-S3-LCD-1.9		 ESP32-S3R8 8MB 16MB 170 × 320 SPI ST7789 - √ - √ - - √ 40PIN header, compatible with Pico header

ESP32-C6-Touch-LCD-1.9		 ESP32-C6FH8 - 8MB 170 × 320 SPI ST7789 CST816 √ - √ - - √ 40PIN header, compatible with Pico header

ESP32-C6-LCD-1.9		 ESP32-C6FH8 - 8MB 170 × 320 SPI ST7789 - √ - √ - - √ 40PIN header, compatible with Pico header

ESP32-S3-Touch-LCD-1.85C		 ESP32-S3R8 8MB 16MB 360 × 360 QSPI ST77916 CST816 - √ √ √ √ √ I2C, UART, 2×14PIN header (1.27mm pitch)

ESP32-S3-Touch-LCD-1.85C-BOX		 ESP32-S3R8 8MB 16MB 360 × 360 QSPI ST77916 CST816 - √ √ √ √ √ I2C, UART, 2×14PIN header (1.27mm pitch)

ESP32-S3-Touch-LCD-1.85B		 ESP32-S3R8 8MB 16MB 360 × 360 QSPI ST77916 CST816 √ √ √ √ √ √ UART, GPIO

ESP32-S3-Touch-LCD-1.85		 ESP32-S3R8 8MB 16MB 360 × 360 QSPI ST77916 CST816 √ √ √ √ √ √ I2C, UART, GPIO pads

ESP32-S3-LCD-1.85		 ESP32-S3R8 8MB 16MB 360 × 360 QSPI ST77916 - √ √ √ √ √ √ I2C, UART, GPIO pads

ESP32-S3-Touch-LCD-1.83		 ESP32-S3R8 8MB 16MB 240 × 284 SPI ST7789P CST816D √ √ √ √ √ √ Reserved I2C, UART, USB pads

ESP32-C6-Touch-LCD-1.83		 ESP32-C6 - 16MB 240 × 284 SPI ST7789P CST816D √ √ √ √ √ √ Reserved I2C, UART, USB pads

ESP32-C6-Touch-LCD-1.69		 ESP32-C6 - 16MB 240 × 280 SPI ST7789V2 CST816T √ √ - √ √ √ Reserved USB, I2C, UART, and GPIO pads

ESP32-C6-LCD-1.69		 ESP32-C6 - 16MB 240 × 280 SPI ST7789V2 - √ √ - √ √ √ Reserved USB, I2C, UART, and GPIO pads

ESP32-S3-Touch-LCD-1.69		 ESP32-S3R8 8MB 16MB 240 × 280 SPI ST7789 CST816 √ √ - - - √ I2C, UART, GPIO pads

ESP32-S3-LCD-1.69		 ESP32-S3R8 8MB 16MB 240 × 280 SPI ST7789 - √ √ - - - √ SH1.0 12PIN header

ESP32-C6-LCD-1.54		 ESP32-C6 - 16MB 240 × 240 SPI ST7789 - √ - √ √ √ √ I2C, UART pads

ESP32-C6-Touch-LCD-1.54		 ESP32-C6 - 16MB 240 × 240 SPI ST7789 CST816 √ - √ √ √ √ I2C, UART pads

ESP32-S3-LCD-1.54		 ESP32-S3R8 8MB 16MB 240 × 240 SPI ST7789 - √ - √ √ √ √ I2C, UART pads

ESP32-S3-Touch-LCD-1.54		 ESP32-S3R8 8MB 16MB 240 × 240 SPI ST7789 CST816 √ - √ √ √ √ I2C, UART pads

ESP32-S3-Touch-LCD-1.47		 ESP32-S3R8 8MB 16MB 172 × 320 SPI JD9853 AXS5106L - - √ - - √ 22PIN header

ESP32-S3-LCD-1.47		 ESP32-S3R8 8MB 16MB 172 × 320 SPI ST7789 - - - √ - - - 18PIN header

ESP32-S3-LCD-1.47B		 ESP32-S3R8 8MB 16MB 172 × 320 SPI ST7789 - √ - √ - - √ 18PIN header

ESP32-C6-Touch-LCD-1.47		 ESP32-C6FH8 - 8MB 172 × 320 SPI JD9853 AXS5106L √ - √ - - √ 22PIN header

ESP32-C6-LCD-1.47		 ESP32-C6FH8 - 8MB 172 × 320 SPI ST7789 - - - √ - - - 18PIN header

ESP32-C3-LCD-1.47		 ESP32-C3FH4 - 4MB 172 × 320 SPI ST7789 - - - √ - - - 18PIN header

ESP32-S3-Touch-LCD-1.46B		 ESP32-S3R8 8MB 16MB 412 × 412 QSPI SPD2010 SPD2010 √ √ √ √ √ √ 20pin GPIO header

ESP32-S3-Touch-LCD-1.46		 ESP32-S3R8 8MB 16MB 412 × 412 QSPI SPD2010 SPD2010 √ √ √ √ √ √ 20pin GPIO header

ESP32-C6-LCD-1.3		 ESP32-C6FH4 - 4MB 240 × 240 SPI ST7789 - - - √ - - - 2.54mm 12PIN header

ESP32-C6-LCD-1.3-M		 ESP32-C6FH4 - 4MB 240 × 240 SPI ST7789 - - - √ - - - 2.54mm 12PIN header

ESP32-S3-LCD-1.3		 ESP32-S3R8 8MB 16MB 240 × 240 SPI ST7789 - √ - √ - - √ 2.54mm 16PIN header

ESP32-S3-LCD-1.3-B		 ESP32-S3R8 8MB 16MB 240 × 240 SPI ST7789 - √ - √ - - √ 2.54mm 16PIN header, with case

ESP32-S3-LCD-1.3-C		 ESP32-S3R8 8MB 16MB 240 × 240 SPI ST7789 - √ - √ - - √ 2.54mm 16PIN header, with case and prism cube

ESP32-S3-Touch-LCD-1.28		 ESP32-S3R2 2MB 16MB 240 × 240 SPI GC9A01A CST816 √ - - - - √ SH1.0 12PIN header

ESP32-S3-LCD-1.28		 ESP32-S3R2 2MB 16MB 240 × 240 SPI GC9A01A - √ - - - - √ 2 × 20PIN header (1.27mm pitch)

ESP32-C3-LCD-0.71		 ESP32-C3FH4 - 4MB 160 × 160 SPI GC9D01 - - - - - - √ 12PIN GPIO pads

ESP32-S3-LCD-0.85		 ESP32-S3 8MB 8MB 128 × 128 SPI GC9107 - - - √ √ √ √ I2C, UART pads

ESP32-C6-LCD-0.85		 ESP32-C6 - 8MB 128 × 128 SPI ST7735 - - - √ √ √ √ I2C, UART pads

ESP32-C6-GEEK		 ESP32-C6 - 16MB 240 × 135 SPI ST7789P3 - - - √ - - - I2C, UART, GPIO

ESP32-S3-GEEK		 ESP32-S3R2 2MB 16MB 240 × 135 SPI ST7789P3 - - - √ - - - I2C, UART, GPIO

Quick Overview

* the 3.7V Lithium Batt is optional.
  1. ESP32-S3-LCD-0.85 host x1
  2. PC insulating sheet x1
  3. OPTIONAL 3.7V 1000mAh Lithium Batt x1
1ESP32-S3-LCD-0.85
2Silver polyester lanyard
3Lithium Batt