STLINK-V3SET, modular debugger / programmer for STM32 / STM8

SKU: 15880
Part Number: STLINK-V3SET
Brand: ST

$64.99
$63.992+
$63.393+
$62.994+

Description

Details

STLINK-V3SET, modular in-circuit debugger and programmer for STM32/STM8
STLINK-V3SET Debugger/Programmer

Suitable for STM8 / STM32 microcontrollers

The STLINK-V3SET is a modular stand-alone debugging and programming probe for the STM8 and STM32 microcontrollers. The SWIM and JTAG/SWD interfaces are used to communicate with any STM8 or STM32 microcontroller located on an application board.

Features at a glance
  • Stand-alone probe with modular extensions
  • Self-powered through a Micro-B USB connector (does not provide power supply to the target application)
  • USB 2.0 high-speed compatible interface
  • Direct firmware update (DFU) support, to use with more future devices
  • Supports JTAG / SWD interfaces, 3V~3.6V application voltage support and 5 V tolerant inputs
  • Supports SWIM interface, 1.65V~5.5V application voltage support, only available with adapter board MB1440
  • Virtual COM port (VCP) specific features:
    • 3 V to 3.6 V application voltage support on the UART interface and 5 V tolerant inputs
    • VCP frequency up to 15 MHz
    • Available on STDC14 debug connector (not available on MIPI10)
  • Drag-and-drop Flash programming
  • Two color LEDs: communication, power

Software Support

Hardware Support

All STM32 MCUs with JTAG / SWD interface


All STM8 MCUs with SWIM interface

  • for reference only, the STM32 and STM8 boards above are NOT included
  • JP4 and JP6 jumper caps must be connected to use the SWIM interface

Product assembly diagram

STLINK Series Selection Guide
ItemV3MINIEV3SETV2
JTAG/SWD application voltage 1.65V~3.6V① 3V~3.6V 1.65V~3.6V①
SWIM application voltage N/A 1.65V~5.5V 1.65V~5.5V
SWV support YES②
Debug interface multi multi③ 2
LED Indicator two colors④
① ST-LINK/V2 and STLINK-V3MINIE support STM32 low-power devices.
② Only available for STM32 at present.
③ STLINK-V3SET features GPIO port besides the programming port.
④ Two colors LED indicates both power and communication.

What's On Board
  1. Micro USB port
  2. Power LED indicator
  3. COM LED indicator
    COM LED is blinking RED: the first USB enumeration with the PC is taking place.
    COM LED is RED: communication between STLINK-V3SET and the PC is established (end of enumeration).
    COM LED is blinking GREEN/RED: data are being exchanged between the target and the PC.
  4. UART header (VCP)
  5. SWIM header
  6. SWD header
  1. SWIM ON/OFF
    enabled when jumper cap is connected
  2. CAN header
  3. CAN ON/OFF
    enabled when jumper cap is connected
  4. UART Bridge
  5. SPI/UART/I2C/CAN/GPIOs Bridge
  6. SPI Bridge
  7. JTAG20 header
  8. STDC14 header

Product show


Outline dimensions

Resources & Services

Weight: 0.23 kg

Quick Overview

STLINK-V3SET x1