Rail-mount TTL To RS485 Galvanic isolated Converter, 600W Lightningproof & Anti-Surge, Multi-Isolation Protection

SKU: 23778
Part Number: TTL TO RS485 (B)
Brand: Waveshare

$11.99
$11.592+
$11.393+
$11.314+

Description

Details

Rail-mount TTL To RS485 Galvanic isolated Converter, 600W Lightningproof & Anti-Surge, Multi-Isolation Protection
Rail-mount TTL To RS485 (B)

Galvanic isolated Serial Port Converter

Features at a glance
  • Compatible with TTL/RS485 standard, converting the TTL signal into differential RS485 signal, support half-duplex communication
  • Compatible with 3.3V ~ 5V TTL signal level, provides anti-reverse and over-voltage protection for power supply interface
  • Onboard unibody power supply isolation, provides stable isolated voltage and needs no extra power supply for the isolated terminal
  • Onboard unibody digital isolation, allows signal isolation, high reliability, strong anti-interference, low power consumption
  • Onboard TVS (Transient Voltage Suppressor), effectively suppresses surge voltage and transient spike voltage in the circuit, lightningproof & anti-electrostatic
  • Onboard resettable fuse and protection diodes, ensures the current/voltage stable outputs, provide over-current/over-voltage protection, improve shock proof performance
  • Onboard RS485 output terminal 120R resistor, enabled/disabled via switch
  • Industrial rail-mount ABS case design, small in size, easy to install, and cost-effective
Specifications
Product Type Galvanic isolated TTL To RS485 converter
Power supply interface Power supply 3.3V ~ 5V
Protection over-voltage, reverse-proof
Device Port TTL/RS485 standard compatible
TTL Connector screw terminal
Transmission distance about 10m
Transmission mode point-to-point
RS485 Connector screw terminal
Protection 600W lightningproof and surge-suppress, 15KV ESD protection
Terminal resistor 120R, enabled/disabled via switch
Transmission Distance About 1.2km
Transmission Mode point-to-multipoint (up to 32 nodes, it is recommended to use repeaters for 16 nodes or more)
Appearance Case Rail-mount ABS case, suitable for 35mm DIN rail
Dimensions 91.6 × 58.7 × 23.3mm

Primary function

Converting the TTL signal into balanced differential RS485 signal
for interface converting, expanding nodes and long-distance communication

Rail-Mount Support

Easy To Combine Multi Rail-Mounted Serial Server Together, More Freely

Multiple Protection, Safe And Stable

Onboard power and signal isolation, provide stable isolated voltage, high reliability and strong anti-interference. Onboard Lightningproof Diodes and TVS (Transient Voltage Suppressor), effectively suppress surge voltage and transient spike voltage in the circuit, lightningproof & anti-electrostatic. Onboard resettable fuse and protection diodes, ensures the current/voltage stable outputs, provides over-current/over-voltage protection, improves shock proof performance

Interface Introduction
Top side screw terminal Bottom side screw terminal
VCC Power Input
DC 3.3V~5V power supply
DIP Switch 120R enable switch
GND Ground SGND RS485 signal ground
TXD TTL transmit data pin A+ RS485 differential signal positive
RXD TTL receive data pin B- RS485 differential signal negative
Communication Connection Diagram

TTL convert to RS485, point to point, half-duplex communication, suitable for interface conversion


TTL convert to RS485, point-to-multipoint, half-duplex communication, suitable for expanding nodes


Two groups TTL To RS485 conversion, point-to-point, half-duplex communication, suitable for extending the communication distance of TTL


Application Examples

The TTL To RS485 (B) can be widely used for point-to-point, point-to-multipoint, long distance cascaded communication network between two hosts, or between host and MCU/Peripheral. It also can be used in the application scenarios that require TTL To RS485 conversion such as Industrial Automation and IoT.

Product Show
Dimensions
Resources & Services

Weight: 0.048 kg

Quick Overview

  1. TTL To RS485 (B) x1
  2. Screwdriver x1
1
2