Rail-mount SX1262 LoRa Data Transfer unit, RS232/RS485/RS422 to LoRa, Suitable for Sub-GHz band

$21.99 - $25.99
Version Options
Power supply + Serial cable
Power plug

Related Products:

Description

Details

Rail-mount SX1262 LoRa Data Transfer unit, RS232/RS485/RS422 to LoRa, Suitable for Sub-GHz band
Rail-mount SX1262 LoRa DTU

RS232 / RS485 / RS422 to LoRa

Suitable for data acquisition in industry and agriculture


Version Options

SX1262-LoRa-DTU-HF
HF version is 850 ~ 930MHz frequency
Applicable to Europe, North America and Oceania

SX1262-LoRa-DTU-LF
LF version is 410 ~ 510MHz frequency
Applicable to Europe, Asia

* Please select the frequency version according to the local radio regulations before placing order


Features at a glance

SX1262-LoRa-DTU is a wireless data transfer unit with RS232, RS485 and RS422 interfaces based on the SX1262 module. Adopts LoRa Modulate and Demodulate technology, with the advantages of anti-interference and long-distance communication (up to 5KM). Supports point-to-point, point-to-multipoints, relay network, AES, etc. Compact size and easy to install, suitable for the wireless data transmission and device control of industrial standard or non-standard user protocol

  • Adopts LoRa Modulate and Demodulate technology, anti-interference and long-distance communication
  • Adopts the original SX1262 chip, with -148dBm reception sensitivity and 22dBm emitt power
  • Supports preamble detection, with CRC, automatic packetization, 960 bytes cache functions
  • Supports LBT sending, RSSI output, AT command configuration
  • AES communication to ensure data transmission security
  • Supports multi-level relay networking to increase the wireless communication distance
  • Supports host configuration and firmware upgrade (support firmware customization for batch order)
  • Adopts high-quality components such as TCXO to ensure stable operation under harsh working conditions
  • Comes with development resources and manual
Specifications
Communication interface
Interface Screw terminals: RS485 × 1, RS422 × 1
DB9 male connector: RS232 × 1
SMA-KE female connector: 6dBi omni-directional antenna × 1
RS485 600W lightningproof, TVS diode protection, anti-surge, overcurrent protection (reserved 120R balanced resistor header)
RS232 TVS diode, anti-surge and ESD protection
RS422 Anti-surge, overcurrent protection (reserved 120R balanced resistor header)
Wireless Parameters
Frequency Band Sub-GHz (410~510MHz, 850~930MHz)
Signal Modulation LoRa
Encryption Type AES
Emit Power +22dBm Max
Reception Sensitivity -148dBm
SERIAL Parameters
Baud Rate 1200 ~ 115200bps
Parity Bit None, Odd, Even
Data Bit 8 ~ 9 bits
Flow Control N/A
Environmental Requirement
Operating Temperature 0 ~ 85℃
Humidity Range 5% ~ 95% relative humidity
Others
Power Supply Screw terminals 6 ~ 28V or DC 12V, overcurrent, overvoltage and reverse-proof
Case Aluminum alloy
Dimensions 77.0 × 24.0 × 64.2mm

Primary function

Support RS232 / RS485 / RS422 to LoRa

* Note: It does not support RS232, RS485, RS422 to LoRa at the same time, and RS232, RS485, RS422 cannot be converted to each other at the same DTU.


Rail-mount LoRa Data Transfer unit

Industrial rail-mount design, small in size, easy to install, and cost-effective

The LoRa Spread Spectrum Technology

Compared to traditional communication, LoRa Chirp Spread Spectrum (CSS) and Frequency Hopping Spread Spectrum (FHSS) technologies greatly improve the performance of long-range communication and anti-interference, widely used in military and industrial communication fields.

Multiple communication methods
Can Be Set Via Software
Relay Networking

The radio station can realize multi-level relay networking, suitable for ultra long-range distance or complex environment networking communication, allows multi networking on the same region

AT Command Mode

Users can query the current status of the module or set parameters by sending AT commands

AES Communication

The secret key is writable but unreadable, the devices with the encrypted transmission enabled and the same key can communicate with each other normally for greater security

Listen Before Talk (LBT)

The module will actively monitor the environmental noise of the channel before sending. If the noise exceeds the threshold, the sending will be delayed. This function can improve the communication success rate of the module in harsh environments, suitable for networking transmission and anti-collision processing

Receive Signal Strength Indication (RSSI)

Supports serial port output of data packet signal strength, can be used to evaluate signal quality, improve communication network, and measure distance. Supports serial port output of environmental noise signal strength, can be used to manually realize LBT function.

High-quality Components

For stable performance of communication module

Original chip
SX1262

Industrial grade crystal oscillator
-40 ~ 85℃


Temperature Compensated Crystal Oscillator

Ensure the long time working of the module without frequency shift at the high
and low temperature environment of industry

Multiple Protection, Safe And Stable

Built-in TVS (transient voltage suppression tube) can effectively suppress the surge voltage and transient peak voltage in the circuit, lightningproof & ESD protection. Built-in resettable fuse and protection diode to ensure stable output of current and voltage, prevents over-current and over-voltage proof, improve shock proof performance

Aluminium Alloy Enclosure

Aluminium Alloy Enclosure With Sand Blasting And Anodic Oxidation
Solid And Durable, Fashion And Good Hand Feeling

Interface introduction
Actual test environment

Sunny weather with an open field, 22dBm emit power, airspeed 0.3kbps,
6dBi magnetic CB antenna, 3m antenna height, 5km distance

Product Show
Outline Dimensions
Resources & Services

* Resources for different product may vary, please check the wiki page to confirm the actually provided resources.

Quick Overview

SX1262-LoRa-DTU-LF

  1. SX1262-LoRa-DTU-LF x1
  2. Magnetic CB antenna x1
  3. OPTIONS Female to female serial cable ~1.5m x1
  4. OPTIONS 12V 1A power supply x1

SX1262-LoRa-DTU-HF

  1. SX1262-LoRa-DTU-HF x1
  2. Magnetic CB antenna x1
  3. OPTIONS Female to female serial cable ~1.5m x1
  4. OPTIONS 12V 1A power supply x1