Nano Base Board (B) for Raspberry Pi Compute Module 4, Same Size as the CM4

SKU: 21726
Part Number: CM4-NANO-B
Brand: Waveshare

$17.99
$17.592+
$17.393+
$17.314+
Description

Details

Nano Base Board (B) for Raspberry Pi Compute Module 4, Same Size As The CM4
Nano Base Board (B) for CM4

Suitable For Evaluating The Raspberry Pi CM4 Or Being Integrated Into End Products

Base Board for Compute Module 4 Lite/eMMC

Compact, Yet Complete

Standard CM4 Socket, 40PIN GPIO, Gigabit Ethernet, USB2.0, DSI, CSI, 3.5mm audio jack...
all in the compact body just as the size of CM4

Note: the CM4 is NOT included. Please buy it separately if necessary.
Specifications
CM4 socket suitable for all variants of Compute Module 4
Networking Gigabit Ethernet RJ45 connector
Connector Raspberry Pi 40PIN GPIO header × 1
USB USB 2.0 Type A connector × 1
Display MIPI DSI port × 1 (15pin 1.0mm FPC connector)
Camera MIPI CSI-2 port × 1 (15pin 1.0mm FPC connector)
Video Mini HDMI port × 1, supports 4K 30fps output
Audio 3.5mm jack
Storage Micro SD card socket for Compute Module 4 Lite (without eMMC) variants
Power input 5V
Dimensions 56 × 41mm
What's On Board
  1. CM4 socket
    suitable for all variants of Compute Module 4
  2. Micro SD card slot
    for connecting a Micro SD card with pre-burnt image (Lite variant ONLY)
  3. 40PIN GPIO header
    for connecting sorts of HATs
  4. Gigabit Ethernet RJ45 connector
  5. Power supply / Programming
    5V power supply, or used for eMMC burning
  6. 3.5mm audio jack
  7. User button
  8. USB2.0 connector
    for connecting sorts of USB devices
  1. CSI connector
    MIPI CSI camera interface
  2. DSI connector
    MIPI DSI display interface
  3. MP1658
  4. Mini HDMI connector
    supports 4K 30fps output
  5. BOOT switch
    ON: Switch USB to Type C interface, will enter download mode when powered on (configured as a large-capacity disk through RPI boot)
    OFF: Switch USB to Type A interface, will not enter download mode when powered on (booted from eMMC or Micro SD card)
Outline dimensions
Resources & Services

WIKI: CM4-NANO-B

* Resources for different product may vary, please check the wiki page to confirm the actually provided resources.

What's the differences
CM4 Base Board Interface count and specifications
PoE Gigabit
ETH
40PIN
GPIO
PCIe USB① DSI HDMI CSI RTC Fan
Header
Power
Input
Features

NANO A
    2.0×1     ×1   5V CM4 sized

NANO B
×1   2.0×1 ×1 ×1 ×1   5V CM4 sized

NANO C
  2.0×1 ×1 ×1 ×1   5V Onboard Camera

mini Base A
×1 M.2 M 2.0×4 ×1 ×2 ×2 5V 5V mini size

mini Base B
×1 M.2 M 2.0×4 ×1 ×2 ×2 5V 5V mini size

mini Base C
×1 M.2 M 2.0×2 ×1 ×2 5V 5V Dedicated 40PIN LCD Connector

Touch screen
×1   M.2 M 2.0×4   ×1 ×1     5V IPS screen

Mini Dual Gigabit
×2   2.0×1         5V SH1.0 5V dual ETH

Binocular camera
×1 M.2 M 2.0×4   ×2       5V dual 8MP
cameras

4CH RS485
×1     2.0×2   ×1 ×2 ×1 5V 7-36V dual ETH

WIFI6 DUAL ETH
×1 M.2 E 2.0×3 ×1 ×2 ×2 ×1 5/12V 7-36V WIFI6 dual ETH

Dual Gigabit ETH
×2 3.0×3 ×1 ×2 ×2 5/12V 7-36V

IoT Dual Gigabit ETH
×2 3.0×2 ×1 ×2 ×2 5/12V 5V 5G/4G support

IoT Base
×1 Gen2×1 2.0×2 ×2 ×2 ×2 5/12V 7-36V 5G/4G support
RS232
RS485
ADC

PoE Base (B)
×1 Gen2×1 2.0×4 ×2 ×2 ×2 5/12V 5V RS232
RS485

PoE UPS Base
×1 M.2 M 2.0×4 ×1 ×2 ×2 5/12V 7-36V UPS

PoE Base
×1 3.0×4 ×2 ×2 ×2 5/12V 7-36V

Raspberry Pi official
×1 Gen2×1 2.0×4 ×2 ×2 ×2 12V 12V

Wireless base
  ×1   M.2 B /
Mini-PCIe
2.0×3   ×1 ×1 5/12V 5V or
7-36V
5G/4G support
RS485
CAN
rail-mount

UPS Wireless base
  ×1   M.2 B 2.0×3   ×1 ×1 5/12V 5V or
7-36V
With UPS
5G/4G support
RS485
CAN
rail-mount

NAS Mini Computer
  ×2 M.2 M×2/
Mini-PCIe
3.0×2   ×2 ×2   5V dual M.2 M KEY slots

5″ touch screen
×1 M.2 M 2.0×4   ×1 ×2 5/12V 5V  

7″ all-in-one
  ×1   M.2 M 2.0×4 used ×1 used 5/12V
used
7-36V touch screen
camera
speaker

13.3″ all-in-one
  ×1     2.0×2           12V HD touch screen

13.3″ Magic Mirror
  ×1     2.0×2           12V HD screen,
Speech Assistant
Note ① USB 3.0 is equivalent to USB 3.2 Gen1
② There's PoE header only on the Raspberry Pi official IO board without PoE circuit, that means additional PoE module is required for the official IO board to enable PoE feature.
Unless otherwise specified, the PoE feature here stands for integrating 802.3af-compliant PoE circuit (5V/2.5A).

Weight: 0.019 kg

Quick Overview

  1. CM4-NANO-B x1
  2. 2*20PIN color-coded straight pinheader x1
1
2