Details
1.51inch Transparent OLED, 128×64 Resolution, SPI/I2C Interfaces, light blue color display
1.51inch Transparent OLED
Embedded independent driver chip, Using SPI/I2C Interfaces
Comes with examples for Raspberry Pi, Arduino, STM32, etc.
- Size
1.51" - Resolution
128×64 - Display Color
Light Blue - Interface
SPI/I2C - Display Panel
OLED - Driver
Embedded driver
Features at a glance
- OLED transparent module, full viewing angle
- Adopts 4-wire SPI and I2C interface, better compatibility, fast data rate
- Comes with development resources (examples for Raspberry Pi/Arduino/STM32)
Specifications
| Operating voltage | 3.3V / 5V | Resolution | 128 × 64 pixels* |
|---|---|---|---|
| Pixel pitch | 0.274 × 0.274mm | Module size | 42.04 × 27.22mm |
| Communication Interface | 4-wire SPI/I2C | Display size | 35.05 × 15.32 mm |
| DISPLAY PANEL | OLED | PIXEL SIZE | 0.254 × 0.254 mm |
| Driver | Embedded driver | Driver Board size | 41 × 22.5 mm |
* there is a non-transparent white area on the side of the cable, but it can be displayed
SPI and I2C control interface switching
supports controller boards like Raspberry Pi/Arduino/STM32
| VCC | Power (3.3V / 5V input) |
|---|---|
| GND | Ground |
| DIN | SPI / I2C data input |
| CLK | SPI / I2CI clock input |
| CS | Chip selection, low active |
| DC | Data/Command selection (high for data, low for command) |
| RST | Reset, low active |
Hardware connection
connecting with Raspberry Pi
connecting with Arduino board
Usage Example
FPC cable Connection
Outline dimensions



