USB AVR JTAGICE XPII

From Waveshare Wiki
Jump to: navigation, search

[中文]

USB-AVR-JTAGICE-XPII
USB AVR JTAGICE XPII

Introduction

  • Debugger & Programmer, compatible with JTAGICE mkII from ATMEL
  • Supports On-Chip Debugging and programming
  • Supports all AVR and AVR32 MCUs with On-Chip Debug capability, including XMEGA devices
  • Supports AVR Studio 4/5/6 or higher version (delivered with firmware for AVR Studio 5, can be updated to support other AVR Studio versions)
More

Resources

FAQ

Question:
Serial port connecttion?
Answer:
Yes,it supports,but you need a extra 12v dc power.For more details:http://www.atmel.com/webdoc/jtagicemkii/jtagicemkii.connecting_serial.html
http://www.waveshare.com/w/upload/9/93/VID_20170106_151136.mp4 (download the video)


Question:
To use this programmer, is it necessary to install the drive?
Answer:
Yes, the driver is required. XPII is compatible with MKII, and XPII and MKII share the same driver provided by AVR Studio. After installed the software, you can find the corresponding MKII device under the option Jungo in the Device Manager.


Question:
Does this programmer support Win8 OS?
Answer:


Question:
My OS is win8, and I want to use this software under IAR. But there is a "FATAL ERROR ..." appeared, why? (PS: Environment: win8 OS, AVR Studio 6.2, IAR in old version)
Answer:
To solve the incompatible problem between IAR software and win8 OS, you can install the IAR 6.4 PATCH provided by IAR official.


Question:
What are the common errors and corresponding resolutions in using USB AVR JTAGICE XPII or AT AVR JTAG ICE MKII?
Answer:
Click here to check the data provided by Atmel: Exhaustive list.



Support

Mail.png Contact your seller (fast response and most recommended)

or send emails to service@waveshare.com (not fast enough but please be patient) for help.

Our working time: 09:00-18:00 (UTC+8 Monday to Saturday)