ARGON-ONE-V5-OLED-Module
User Manual
ARGON-ONE-V5-OLED-Module User manual
Hardware Assembly
ARGON-ONE-V5-OLED-Module Assembly
Assembly instructions
1. Remove the ABS OLED cover from the top case of the Argon ONE V5.
2. Screw the OLED module to the top case as shown in the figure.
3. Connect the OLED module to the first 8 GPIO pins of the Raspberry Pi.
4. After all are connected, assemble the Argon ONE V5 case.
Note: The pictures are for display only. This product does not include the Argon ONE V5 metal case.
Software Settings
Flash Bookworm System
- 1. Connect the TF card to the PC, download and use Raspberry Pi Imager to flash the corresponding system image.
- 2. After the image flashing is complete, save and safely eject the TF card.
- 3. After ensuring that the shell is assembled, insert the TF card into the Raspberry Pi card slot.
- 4. Connect the power adapter to start the system.
- Note: Due to the thickness of the case, please make sure that the Type-C connector of the power supply is fully inserted, otherwise the Type-C connector will not be able to boot normally due to poor contact.
Install Argon ONE V5 Script
1. Connect to the Internet and execute the following code in the terminal:
curl https://download.argon40.com/argon1v5.sh | bash sudo reboot
2. Follow the instructions in the Argon configuration tool to change the settings and enable all the features of the Argon ONE V5 chassis.
Uninstall ARGON ONE V5 Script
To uninstall the Argon ONE V5 script, you can perform this action by clicking on the Argon ONE V5 desktop icon. You can also delete the script through the terminal Shell by entering:
argonone-uninstall sudo reboot
Note: Be sure to reboot after any configuration changes or uninstallation for the modified settings to take effect.
Support
Technical Support
If you need technical support or have any feedback/review, please click the Submit Now button to submit a ticket, Our support team will check and reply to you within 1 to 2 working days. Please be patient as we make every effort to help you to resolve the issue.
Working Time: 9 AM - 6 PM GMT+8 (Monday to Friday)