USB AVRISP PL

[中文]

USB AVRISP PL

Introduction

• AVR ISP Programmer, compatible with AT AVRISP from ATMEL
• A professional low cost In-System Programmer. Programs FLASH , EEPROM, Fuses, and Lock Bit through USB

More

Resources

• User Guide
• Driver
• Software

FAQ

Question:I connect the USB AVRISP PL to a PC, but the PC cannot identify it. Why?

 Answer:

• The PC may identify the USB AVRISP PL as a USB-to-COM interface. Normally, most PCs may have this driver:
  
• If the PC cannot identify the USB AVRISP PL, you can install this driver to your PC: Click here to download

Notice:

If the COM port occupied by the USB AVRISP PL is out of the range of COM1~COM4 (In this example, it is COM6 as the figure above shows), please modify the relative COM port number to the range of COM1~COM4, so that the USB AVRISP PL can work properly.

{{{3}}}

{{{4}}}

{{{5}}}

Support

If you require technical support, please go to the Support page and open a ticket.