CC2530 Eval Kit5

From Waveshare Wiki
Jump to: navigation, search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.
CC2530 Eval Kit5
XBee-USB-Adapter-5.jpg

ZigBee development/evaluation kit designed for CC2530F256
{{{name2}}}

{{{name3}}}

{{{name4}}}

{{{name5}}}

Introduction

ZigBee development/evaluation kit designed for CC2530F256

More

Resources

FAQ

 Answer:

On 64-bit systems, you need to copy MSCOMM32.OCX to C:\Windows\SysWOW64 and then run the registration script. Note: If you still get the same error as above, you also need to copy MSCOMM32.OCX to C:\Windows\System32 and run the registration script.

{{{5}}}


 Answer:

There is a 0R resistor on the onboard antenna of the PCB board. When use the external antenna, you can adjust the 0R to the external antenna side.
CC2530 FAQ01.jpg
Note: 0R is for switching, and you can directly connect it.

{{{5}}}


 Answer:
IPEX antenna with 50ohm and 2.4G frequency band.

{{{5}}}



 Answer:

Two ways to enter the burn-in mode:
1. When not yet powered on first keep P2_1 ground, then power on, and then remove GND (not remove can also be), at this time has entered the burn-in firmware mode, you can re-burn the firmware.
2, When the power is on, always keep P2_1 ground, at this time has entered the burn firmware mode, you can re-burn the firmware. (Note that after burning the firmware, to remove the P2_1 ground, the module can work properly).

{{{5}}}


Support



Technical Support

If you need technical support or have any feedback/review, please click the Submit Now button to submit a ticket, Our support team will check and reply to you within 1 to 2 working days. Please be patient as we make every effort to help you to resolve the issue.
Working Time: 9 AM - 6 AM GMT+8 (Monday to Friday)