3.2inch 320x240 Touch LCD (C)
From Waveshare Wiki
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.
| ||
Introduction
3.2 inch 320*240 DOTS Multicolor Graphic LCD, with touch screen and stand-alone controllers.
| More |
Resources
FAQ
Answer:
- LCD power supply: 2.5V~3.3V
- Backlight power supply: 4.5V~5V
- Average working current of the backlight: 150mA
- Average working current of the LCD panel: 15mA
{{{5}}}
Answer:
The same:
- Pin mapping and resolution are the same.
The difference:
- The LCD controller of 3.2inch 320x240 Touch LCD (A) is SSD1289.
- The LCD controller of 3.2inch 320x240 Touch LCD (C) is ILI9325.
{{{5}}}
Answer:
Although the pin mapping is the same, you have to use the newer program for type (C) LCDs.
{{{5}}}
Answer:
- The Grmma value may differ depending on the batch, so the initialization statements of the demo may be unsuitable for some LCDs. You can try the following init code:
if( DeviceCode == 0x9325 || DeviceCode == 0x9328 )
{
LCD_Code = ILI9325;
LCD_WriteReg(0xE5, 0x78F0); /* set SRAM internal timing */
LCD_WriteReg(0x01, 0x0100); /* set Driver Output Control */
LCD_WriteReg(0x02, 0x0700); /* set 1 line inversion */
LCD_WriteReg(0x03, 0x1030); /* set GRAM write direction and BGR=1 */
LCD_WriteReg(0x04, 0x0000); /* Resize register */
LCD_WriteReg(0x08, 0x0207); /* set the back porch and front porch */
LCD_WriteReg(0x09, 0x0000); /* set non-display area refresh cycle ISC[3:0] */
LCD_WriteReg(0x0A, 0x0000); /* FMARK function */
LCD_WriteReg(0x0C, 0x0000); /* RGB interface setting */
LCD_WriteReg(0x0D, 0x0000); /* Frame marker Position */
LCD_WriteReg(0x0F, 0x0000); /* RGB interface polarity */
/*************Power On sequence ****************/
LCD_WriteReg(0x10, 0x0000); /* SAP, BT[3:0], AP, DSTB, SLP, STB */
LCD_WriteReg(0x11, 0x0007); /* DC1[2:0], DC0[2:0], VC[2:0] */
LCD_WriteReg(0x12, 0x0000); /* VREG1OUT voltage */
LCD_WriteReg(0x13, 0x0000); /* VDV[4:0] for VCOM amplitude */
LCD_WriteReg(0x07, 0x0001);
delay_ms(200);
/* Dis-charge capacitor power voltage */
LCD_WriteReg(0x10, 0x1090); /* SAP, BT[3:0], AP, DSTB, SLP, STB */
LCD_WriteReg(0x11, 0x0227); /* Set DC1[2:0], DC0[2:0], VC[2:0] */
delay_ms(50); /* Delay 50ms */
LCD_WriteReg(0x12, 0x001F);
delay_ms(50); /* Delay 50ms */
LCD_WriteReg(0x13, 0x1500); /* VDV[4:0] for VCOM amplitude */
LCD_WriteReg(0x29, 0x0027); /* 04 VCM[5:0] for VCOMH */
LCD_WriteReg(0x2B, 0x000D); /* Set Frame Rate */
delay_ms(50); /* Delay 50ms */
LCD_WriteReg(0x20, 0x0000); /* GRAM horizontal Address */
LCD_WriteReg(0x21, 0x0000); /* GRAM Vertical Address */
/* ----------- Adjust the Gamma Curve ---------- */
#if 1 /* the Gamma value may differ depending on batch, there are 3 groups for reference */
LCD_WriteReg(0x30, 0x0000);
LCD_WriteReg(0x31, 0x0603);
LCD_WriteReg(0x32, 0x0206);
LCD_WriteReg(0x35, 0x0206);
LCD_WriteReg(0x36, 0x0004);
LCD_WriteReg(0x37, 0x0105);
LCD_WriteReg(0x38, 0x0401);
LCD_WriteReg(0x39, 0x0707);
LCD_WriteReg(0x3C, 0x0602);
LCD_WriteReg(0x3D, 0x0004);
#endif
#if 0
LCD_WriteReg(0x30, 0x0000);
LCD_WriteReg(0x31, 0x0707);
LCD_WriteReg(0x32, 0x0307);
LCD_WriteReg(0x35, 0x0200);
LCD_WriteReg(0x36, 0x0008);
LCD_WriteReg(0x37, 0x0004);
LCD_WriteReg(0x38, 0x0000);
LCD_WriteReg(0x39, 0x0707);
LCD_WriteReg(0x3C, 0x0002);
LCD_WriteReg(0x3D, 0x1D04);
#endif
#if 0
LCD_WriteReg(0x30,0x0007);
LCD_WriteReg(0x31,0x0707);
LCD_WriteReg(0x32,0x0006);
LCD_WriteReg(0x35,0x0704);
LCD_WriteReg(0x36,0x1f04);
LCD_WriteReg(0x37,0x0004);
LCD_WriteReg(0x38,0x0000);
LCD_WriteReg(0x39,0x0706);
LCD_WriteReg(0x3c,0x0701);
LCD_WriteReg(0x3d,0x000f);
#endif
/* ------------------ Set GRAM area --------------- */
LCD_WriteReg(0x50, 0x0000); /* Horizontal GRAM Start Address */
LCD_WriteReg(0x51, 0x00EF); /* Horizontal GRAM End Address */
LCD_WriteReg(0x52, 0x0000); /* Vertical GRAM Start Address */
LCD_WriteReg(0x53, 0x013F); /* Vertical GRAM Start Address */
LCD_WriteReg(0x60, 0xA700); /* Gate Scan Line */
LCD_WriteReg(0x61, 0x0001); /* NDL,VLE, REV */
LCD_WriteReg(0x6A, 0x0000); /* set scrolling line */
/* -------------- Partial Display Control --------- */
LCD_WriteReg(0x80, 0x0000);
LCD_WriteReg(0x81, 0x0000);
LCD_WriteReg(0x82, 0x0000);
LCD_WriteReg(0x83, 0x0000);
LCD_WriteReg(0x84, 0x0000);
LCD_WriteReg(0x85, 0x0000);
/* -------------- Panel Control ------------------- */
LCD_WriteReg(0x90, 0x0010);
LCD_WriteReg(0x92, 0x0600);
LCD_WriteReg(0x07, 0x0133); /* 262K color and display ON */
}
{{{5}}}
Support
Technical Support
If you need technical support or have any feedback/review, please click the Submit Now button to submit a ticket, Our support team will check and reply to you within 1 to 2 working days. Please be patient as we make every effort to help you to resolve the issue.
Working Time: 9 AM - 6 AM GMT+8 (Monday to Friday)