- Description
Display construction | 128*64 DOTS |
---|---|
Display mode | TN/STN |
Display type | Positive Transflective |
Backlight | VDD5.0V, Idd250mA |
Viewing direction | 6 o'clock |
Operating temperature | Indoor |
Driving voltage | Single power |
Driving method | 1/64 duty,1/9 bias, VOP10.5V, VDD5.0V |
Type | COB (Chip On Board) |
Number of data line | 8-bit parallel |
Connector | Pin / ZEBRA |
Driver IC | KS0107 / KS0108 / S6B0108 |
---|---|
Interface | Parallel |
Backlight | Blue |
Character Color | White |
Character Set | ASCII |
Dimension | 93 * 70 * 14 |
PIN NO. | SYMBOL | DESCRIPTION | FUNCTION |
---|---|---|---|
1 | VSS | Ground | 0V (GND) |
2 | VDD | Power Supply For Logic Circuit | +5V |
3 | V0 | LCD Contrast Adjustment / Operating Voltage For LCD | |
4 | RS | Instruction/Data Register Selection | RS = 0 : Instruction Register RS = 1 : Data Register |
5 | R/W | Read/Write Selection | R/W = 0 : Register Write R/W = 1 : Register Read |
6 | E | Enable Signal | |
7 | DB0 | Data Bus | DB0-DB7 |
8 | DB1 | ||
9 | DB2 | ||
10 | DB3 | ||
11 | DB4 | ||
12 | DB5 | ||
13 | DB6 | ||
14 | DB7 | ||
15 | CS1 | Chip 1 Select | |
16 | CS2 | Chip 2 Select | |
17 | /RST | Reset | Reset Signal (Low) |
18 | VEE | Negative Voltage Output/Input (-10V) | |
19 | LEDA | Power Supply For Backlight+ | +5V |
20 | LEDK | Power Supply For Backlight- | 0V |
Weight: 0.081 kg