250x122, 2.13inch E-Ink display HAT for Raspberry Pi

SKU: 12915
Part Number: 2.13inch e-Paper HAT
Brand: Waveshare

$18.99
$16.9920+
$15.99100+

Select Version:

Description

Details

250x122, 2.13inch E-Ink display HAT for Raspberry Pi, SPI interface

Overview

This is an E-Ink display HAT for Raspberry Pi, 2.13inch, 250x122 resolution, with embedded controller, communicating via SPI interface, supports partial refresh.

Due to the advantages like ultra low power consumption, wide viewing angle, great effect under sunlight, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.

Features

  • No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, basically power is only required for refreshing
  • Compatible with Raspberry Pi 2B/3B/Zero/Zero W
  • Preserved solder pads for SPI interface, for connecting with other controller boards like Arduino/Nucleo, etc.
  • Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)

Specifications

  • Operating voltage: 3.3V
  • Interface: SPI
  • Outline dimension: 65mm × 30.2mm
  • Display size: 23.71mm × 48.55mm
  • Dot pitch: 0.194 × 0.194
  • Resolution: 250 × 122
  • Display color: black, white
  • Grey level: 2
  • Refresh power: 26.4mW(typ.)
  • Standby power: <0.17mW
  • Viewing angle: >170°

Interface

SYMBOL DESCRIPTION
VCC 3.3V
GND Ground
NC NC
DIN SPI MOSI pin
CLK SPI SCK pin
CS SPI chip selection, low active
DC Data/Command selection (high for data, low for command)
RST External reset, low active
BUSY Busy status output, low active

Demo

2.13inch e-Paper HAT demo

Dimensions

2.13inch e-Paper HAT dimensions

Development Resources

Wiki : www.waveshare.com/wiki/2.13inch_e-Paper_HAT

Selection Guide

Part Number Grey Level Resolution Display size (mm) Outline Dimension (mm) Partial Refresh Interface
1.54inch e-Paper Module 2 200x200 27.60 × 27.60 48.0 × 33.0 3-line SPI / 4-line SPI
2.13inch e-Paper HAT 2 250x122 48.55 × 23.71 65.0 × 30.2 3-line SPI / 4-line SPI
2.9inch e-Paper Module 2 296x128 66.89 × 29.05 89.5 × 38.0 3-line SPI / 4-line SPI
4.3inch e-Paper UART Module 4 800x600 88.00 × 66.00 118.0 × 75.0 × UART
Package Content

Weight: 0.014 kg

Quick Overview

  1. 2.13inch e-Paper HAT x1
  2. RPi screws pack (2pcs) x1
  3. 9-pin 2.54 pitch SMD pinheader x1
1
2
3